VENTECH's 45 Degree Angle Cutter Machine

There are many cases of fiber laser cutting machine failure. However, if the fiber laser cutting machine is found to be malfunctioning, we should use reasonable methods to repair the fiber laser cutting machine in time. However, the reasons for the failure of the fiber laser cutting machine are different, so the solutions we need to take are also different.

　　 Next, let the editor introduce to you, what are the methods to repair the fault phenomenon of the fiber laser cutting machine:

　　 1. The machine does not work: check whether the power cord switch of the fiber laser cutting machine is turned on; check whether the power cord is connected to the power plug and whether it is loose; check whether the panel power is turned on.

　　 2. The pump does not work normally: Check whether the circulation system of the fiber laser cutting machine is blocked; check the liquid level of the entire system, make sure the pump can receive liquid, and check whether the pump motor can run.

　　 3. No refrigeration or insufficient refrigeration: Check whether the voltage is too low or too high; check whether too much heat is transferred to the cooling liquid of the fiber laser cutting machine, because it will exceed the cooling capacity of the refrigeration system.

　　 Four. Insufficient pump suction: check whether the connecting pipe of the fiber laser cutting machine is restricted; whether the voltage is too low or the fluid viscosity is too high.

　　 When we maintain the fiber laser cutting machine, we must use the correct method. If the maintenance method is not correct, it will damage the fiber laser and cause damage. If you find that the fault of the fiber laser cutting machine cannot be solved, you can contact the manufacturer to solve it.
If you have a need for punching machine manufacturer INFO CENTER, like , and , you need to be able to find a dependable provider who you can trust when necessary.
YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is the major INFO CENTER provider. powder coating machine for sale businesses need the right tools at their disposal in order to handle powder coating machine price. Ventech Automatic Machine is your best choice.
In order to obtain the most suitable for your powder coating system for sale, you need to contact qualified suppliers which can produce super quality to your specifications and offer a friendly price.

Nowadays, with the rapid development of laser equipment, the pace of replacing old equipment with new equipment to become the new mainstream of the manufacturing industry is accelerating, such as fiber laser cutting machines replacing CO2 laser cutting machines. Why the fiber laser cutting machine replaces the carbon dioxide laser cutting machine should be analyzed from the following three aspects.
1. Maintenance cost of carbon dioxide laser cutting machine: high maintenance cost, high price of front mirror and tail mirror, short service life of turbine bearing, and high replacement cost. Fiber laser cutting machine: It is free of maintenance and basically free of consumables. It can handle harsh working environments and has high tolerance to dust, vibration, shock, humidity, and temperature.
2. Processing cost: The photoelectric conversion rate of CO2 laser cutting machine is much lower than that of fiber laser cutting machine. Laser tube is a kind of consumer product. Under the same power, the fiber optic equipment can make better use of the laser to create value, so the fiber processing cost is lower. Of course, the purchase price of fiber equipment is higher than that of carbon dioxide equipment.
3. Technology: CO2 laser has complex structure, high maintenance cost, large beam divergence, and is not suitable for large format processing. Although the cutting seams are relatively thin, they are very slow in handling thick plates. The laser characteristics of fiber laser cutting machine have the characteristics of miniaturization, intensiveness, high brightness and high conversion rate. In thin plate processing, the cutting speed of the same power fiber laser cutting machine is 2-3 times that of carbon dioxide, and the cutting part is stable.
The above is the reason why the carbon dioxide laser cutting machine is gradually eliminated. The reason why the fiber laser cutting machine can quickly gain a foothold in the market and gradually replace the traditional cutting process is precisely because of its technical advantages. Product finishing provides the necessary technology.


To be the best worldwide provider of higher-value INFO CENTER and the center for quality employment opportunities.
To reduce your production costs, get your and assembly machine manufacturers from YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.,you will get high quality warranty at favorable price in return. Visit Ventech Automatic Machine.
Always put quality over cost is the rule of thumb if you want to buy a really durable and reliable . But with YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD., you can have the same.