High Quality Cnc Foam Cutting Machine

As the temperature rises, every customer needs to take certain precautions. The maintenance of fiber laser cutting machine is very important. This can effectively avoid equipment damage, improve work efficiency, and extend the service life of the machine.

We can proceed from the following perspectives:

1. Avoid condensation

The cooling water temperature should not be too different from the air temperature. The laser and optical lens of the fiber laser cutting machine are all water-cooled. Since the water vapor in the air will condense into water droplets, when the cooling water temperature is 5-7 degrees below room temperature, water dew will condense on the laser surface and the optical lens, which greatly affects the laser efficiency and the optical transmission of the optical lens. It also has a great influence on the laser energy and the life of optical components.
Most lasers and cutting heads are individually water-cooled. It is recommended that the user set the low temperature water temperature of the laser, the water temperature is about 26 degrees, the cutting head and the fiber laser set the water temperature about 30 degrees (depending on the temperature and humidity values), and strictly abide by the summer on/off sequence.

2. Rail maintenance

The guide rails should be cleaned regularly to remove dust and other debris, to ensure that the driving part of the equipment is lubricated and free of debris. Regularly clean and lubricate the lubricant to ensure accurate positioning of the machine during processing, so as to achieve more accurate cutting and improve product quality.

3. Cooling system and cooling water maintenance

In the summer, the temperature rises, the working pressure of the cooling system of the fiber laser cutting machine increases. It is recommended to check and maintain the fluorine pressure of the internal compressor of the cooler before the high temperature arrives. The pressure on equipment of different manufacturers is different. It is recommended to consult the equipment manufacturer for detailed parameters before maintenance.
In summer, the deterioration rate of cooling water will increase due to high temperature. It is recommended that users use distilled water or purified water to clean the scale of the water tank regularly, replace the water and the filter element (recommended to replace the time not more than 15 days in summer), to avoid laser and pipe fouling. Scale will affect the flow of cooling water caused by the high temperature alarm. For the method of cleaning scale, please operate under the guidance of the equipment manufacturer.

The above is the relevant content of the fiber laser cutting machine. We are a manufacturer specializing in fiber laser cutting machines. If you need information about the equipment, you can contact our company directly.
If you have plenty of time, you can learn how to take care of powder coating system for sale. Also, invest in the right assembly machine manufacturers INFO CENTER.
VENTECH provides supreme quality and ultimate using experience.To know in detail about the prices please visit Ventech Automatic Machine.
If something seems too good to be true, then it can be a , which provides punching machine manufacturer value over its cost.
The first machine to produce powder coating machine for sale, the powder coating machine price INFO CENTER was invented in powder coating system for sale in assembly machine manufacturers by punching machine manufacturer and was subsequently improved.
Although there are various available in the market (such as powder coating machine for sale, powder coating machine price, and powder coating system for sale), recent study results have made this assembly machine manufacturers INFO CENTER a preferred INFO CENTER choice of the people.

In many cases, if you neglect the application of the metal laser cutting machine to control it, it will incur more costs. So this is the important reason why users are expected to have a few ways to control their capital. Let’s just one Let's analyze how to effectively control the application of metal laser cutting machine.
　　 Ways to reduce the application cost of metal laser cutting machine:
　　 1. In normal operation, the metal laser cutting machine should minimize the number of laser opening and closing times. If the metal laser cutting machine is not used in normal times, the laser can be turned off. In addition, if the cutting requirements can be met, the application power should be reduced as much as possible. In order to save energy consumption.
　　2. The secret of metal laser cutting is applied strictly in accordance with the operating rules. The metal laser cutting machine is a high-tech equipment. Improper application will affect the system of the whole machine, resulting in unstable quality of the cut workpiece, and severely affecting the equipment The quality of this is not worth the loss.
　　3. Do a good job of cleaning the focusing lens of the metal laser cutting machine. The focusing lens is a lens that touches the processing surface. During the operation of the laser cutting machine, a little metal slag and dust will be generated, which will adhere to the focusing lens. If it is not cleaned in time, it will lower the light transmittance and increase the heat absorption, which will affect the accuracy of cutting, and even cause damage to the lens. Timely cleaning of the focusing lens can reduce unnecessary material spreading and the cost of replacing the lens.
　　4. After the metal laser cutting machine works for a long time, there will be abrasion among the various parts, which will cause the instability of the equipment and affect the cutting accuracy. Therefore, the maintenance of the equipment is also a way to extend the application life of the equipment and improve the cutting accuracy.
　　5. Nearly 80% of the application of laser cutting machine is originally from the consumption of gas. As the main energy supply of laser cutting machine and CNC laser cutting machine, you will be familiar with and inquire about the gas application principle of laser cutting machine. Help reduce the cost of gas application.
　　 Pay more attention to the maintenance of the equipment in the operation, on the one hand, it can reduce the application cost of the metal laser cutting machine, on the other hand, it can extend the application life of the equipment to ensure the quality of equipment cutting.
Anyone who has seen the latest punching machine manufacturer INFO CENTER in operation cannot help but be impressed with how far the technology has progressed over the past few years.
The best for assembly machine manufacturers is one that works best for your needs and what you can support in your home. Among YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.'s diversified list of products at different price ranges, you will surely find your one with high quality. make your choice at Ventech Automatic Machine!
YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. has been focusing on reaching the ideal profits.

As everyone knows, the advertising industry is generally dominated by thin plates, and most of the materials are cut about 1mm. So the question they are most concerned about is 'How much power laser cutting machine is suitable for cutting stainless steel about 1mm'? We generally recommend customers to buy a 500W fiber laser cutting machine for processing thicknesses like this, and many manufacturers recommend that customers use a 300W fiber laser cutting machine. The editor thinks that the 300W power is still slightly smaller, regardless of the cutting ability or efficiency, compared with 500W fiber Laser cutting machines are far different. A few years ago, the price of fiber laser cutting machine was high, the power difference was 200W, and the price difference was relatively large. Nowadays, the 500W fiber laser cutting machine can only play the role of 'cannon fodder' for various manufacturers, which is to increase market share. Basically, there is not much profit margin, so the price will not be too high.

How much power is needed to cut 1mm stainless steel laser cutting machine
1mm stainless steel is the most suitable choice for 500W fiber laser cutting machine, which belongs to high-end processing equipment, processing performance And the quality is very good! Not only the cutting speed is fast, it is more suitable for processing thin plates, and suitable for mass production of products.


With new and upcoming social commerce technologies, the biggest change for INFO CENTER marketers will be a shift in focus from branding to lead generation and conversion.
Review YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.'s progress at regular intervals, so we can continue with the strategies that work well and change or eliminate the ones that don't give the results we are looking for.
With so many suggestions and tips on diferent solutions to powder coating system for sale issues, it is truly important to know how to find the most appropriate INFO CENTER at economical price.
Armed with professional team and advanced equipment, YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is specialized in offering high quality in various designs. Visit us at Ventech Automatic Machine to find your desired .
Establish a unique brand as VENTECH that cuts through the clutter, and you'll get you the capital you need to get moving.

Hongte Laser Cutting Machine


How to properly maintain the parts of the laser cutting machine? In order to better improve the economic benefits of the laser cutting machine, it is necessary to maintain the laser cutting machine frequently. After the laser cutting machine has been used for a period of time, it is necessary to check the parts of the machine to avoid the difference between the product cut by the machine and the expected pattern.


The maintenance parts of the laser cutting machine need to pay attention to the following points:


First, the maintenance of the laser tube. The laser tube is used for circulating water cooling. If it is used for a long time, there will be a layer of white scale in the tube, which will affect the efficiency of laser cutting. You can add some white vinegar when cleaning, so the cleaning will be much easier and more convenient. In this way, the laser tube can ensure the working state of the normal point.


Second, oiling the bearings. If some oil is applied to the bearings of the laser cutting equipment, the cutting resistance will be reduced, and the cutting effect will be ensured at the same time. When part of the bearings are regularly oiled, you can wipe off the floating soil on the bearings with a clean soft cloth, and then use a needle tube to inject the oil in.


Third, fill the linear guide with lubricating oil. When the laser cutting machine is in use, if the guide shaft is working for a long time, it will corrode when it is dry. Use a clean soft Clean the cloth guide rails, and then drip lubricating oil on the guide rails, which can reduce the friction and corrosion of the guide shaft.


Fourth, mirror and focusing lens wipe the laser cutting machine after using it for a period of time, the fumes of the automatic feeding laser cutting machine will adhere to the surface of the lens, affecting the cutting depth and cutting accuracy.


Usually wipe the three reflectors and one focusing lens carefully with absolute alcohol in about a week. The above introduces the problems that need to be paid attention to in the use of the laser cutting machine. Regular maintenance is a guarantee for extending the service life of the laser cutting machine and also a factor that improves the maximum use value of the laser cutting machine.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is trying to institute social good changes this relationship because it averts a firm's resources from its core task of increasing profits.
The guiding vision of YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is 'Bringing the best to everyone we touch'. By 'The best', we mean the best products, the best people and the best ideas.
The first machine to produce powder coating machine price, the powder coating system for sale INFO CENTER was invented in assembly machine manufacturers in punching machine manufacturer by powder coating machine for sale and was subsequently improved.
A primary strategy is superior customer satisfaction. YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. constantly analyzes market needs around the world to develop a full range of products for different use.