Maintenance of fiber laser cutting machine in high temperature environment

As the temperature rises, every customer needs to take certain precautions. The maintenance of fiber laser cutting machine is very important. This can effectively avoid equipment damage, improve work efficiency, and extend the service life of the machine.

We can proceed from the following perspectives:

1. Avoid condensation

The cooling water temperature should not be too different from the air temperature. The laser and optical lens of the fiber laser cutting machine are all water-cooled. Since the water vapor in the air will condense into water droplets, when the cooling water temperature is 5-7 degrees below room temperature, water dew will condense on the laser surface and the optical lens, which greatly affects the laser efficiency and the optical transmission of the optical lens. It also has a great influence on the laser energy and the life of optical components.

Most lasers and cutting heads are individually water-cooled. It is recommended that the user set the low temperature water temperature of the laser, the water temperature is about 26 degrees, the cutting head and the fiber laser set the water temperature about 30 degrees (depending on the temperature and humidity values), and strictly abide by the summer on/off sequence.

2. Rail maintenance

The guide rails should be cleaned regularly to remove dust and other debris, to ensure that the driving part of the equipment is lubricated and free of debris. Regularly clean and lubricate the lubricant to ensure accurate positioning of the machine during processing, so as to achieve more accurate cutting and improve product quality.

3. Cooling system and cooling water maintenance

In the summer, the temperature rises, the working pressure of the cooling system of the fiber laser cutting machine increases. It is recommended to check and maintain the fluorine pressure of the internal compressor of the cooler before the high temperature arrives. The pressure on equipment of different manufacturers is different. It is recommended to consult the equipment manufacturer for detailed parameters before maintenance.

In summer, the deterioration rate of cooling water will increase due to high temperature. It is recommended that users use distilled water or purified water to clean the scale of the water tank regularly, replace the water and the filter element (recommended to replace the time not more than 15 days in summer), to avoid laser and pipe fouling. Scale will affect the flow of cooling water caused by the high temperature alarm. For the method of cleaning scale, please operate under the guidance of the equipment manufacturer.

The above is the relevant content of the fiber laser cutting machine. We are a manufacturer specializing in fiber laser cutting machines. If you need information about the equipment, you can contact our company directly.

If you have plenty of time, you can learn how to take care of powder coating system for sale. Also, invest in the right assembly machine manufacturers INFO CENTER.

VENTECH provides supreme quality and ultimate using experience.To know in detail about the prices please visit Ventech Automatic Machine.

If something seems too good to be true, then it can be a , which provides punching machine manufacturer value over its cost.

The first machine to produce powder coating machine for sale, the powder coating machine price INFO CENTER was invented in powder coating system for sale in assembly machine manufacturers by punching machine manufacturer and was subsequently improved.

Although there are various available in the market (such as powder coating machine for sale, powder coating machine price, and powder coating system for sale), recent study results have made this assembly machine manufacturers INFO CENTER a preferred INFO CENTER choice of the people.