VENTECH punch press wholesale for workshop1

HYDRAULIC PUNCH MACHINE

HYDRAULIC PUNCHER

METAL SHEET PUNCH MACHINE

SHEET METAL PUNCHER MACHINE

HYDRAULIC METAL SHEET PUNCHER MACHINE

Mian application for our hydraulic press machine:

Professional and widely be used for molding, stretch, stamping, leveling&rectify and etc for metal or even some plastic material. YSIE32 Series is universal model for all aboveenhance. But due to enhance a certain enhance,we have extend more Series such as:

YSIE27 Series devoting in stretch, stamping for light material.

YSIE28 Series devoting in deep stretch, stamping.

YSIE41 Series devoting in leveling&rectify,

YSIE79 Series devoting in molding from power.

Reminder: As to some extraordinary product need, we can modify our machine to match perfect.

Such as:

--  Big/small -worktable for some widen or lengthen items.

--  Big/small - Extrusion force for deep drawing.

--  Heighten/short column for big daylight.

--  Pressurizer device for hold the pressure for long time cycle.

……………………..

The Main Structure Character of YSIE32(…) Series Hydraulic Press (Standard)

The machine is composed by two parts: Main Machine and Control Structure, and connected by pipeline and electric device. The main machine has composition of machine body, main cylinder and stroke limit device. Control Structure include hydraulic power unit(dynamical system) and electronical cabinet. The main division and function is described as below:

1.Machine Body(All steel is from Shanghai BaoSteel)

The machine body is composed by foundation,top rail,slider block,working table,lower cylinder, upright column, locknut and adjusting nut. The precision is adjusted by adjusting nut and the locknut fixed on the top rail. Foundation, top rail, slider block are made in steel welded structure. The plate's material is Q235-A steel, wilding adopt CO2 protective welding, heat-treatment will be in procedure after welding to eliminate internal stress.

The outside of the machine main structure will be in good smooth, no obvious unevenness phenomenon ,welding seam formation ,welding slag and shed scar imagination. Compressor structure adopt optimization design by computer, It has good strength and stiffness.

2.Main Cylinder- Center components (Use casted formation one time)

The main cylinder is fixed to the top rail area by cylinder port shoulder and the big locknut. Lower end of the piston is connected by coupling flange, bolt and slider. The material of piston head is iron casting to act as guidance. The piston head has the imported YX type sealing ring in the opposite direction.The piston rod is provided with the O type sealing washer  to divided the cylinder into to two cylinder with guidance sleeve,The guide sleeve excircle is provided O type sealing washer with the help of the flange and bolt locking to guarantee no any leakage and highly sel in cylinder.Cylinder flange is provided with a dust ring to ensure that the piston rod of the dust

3. Slider

The movement of the slider is achieved by four vertical column guidance.The guide sleeve between slider and vertical column is alloy material with good abrasion resistance and easy replacement measures after abrasion.The below platform has equipped with T type slot to make the mold stable ,the detailed dimension can be provided under the requirement.

4.Lifting cylinder

Lifting cylinder is a piston type cylinder equipped in the middle hold of the foundation to work for the top or drawing process.

5.Upright Column and lockout

The material of upright column is 45# forged steel,and has process in drawing temper,the quenching hardness of the upright colume surface can reach HRC42-50.The material of Locknut is 45# forged steel,and has produced in blue handle,the connection between the upright colume and locknut is screw thread connection.

6.Stroke limit device

The stroke limit device is equipped in the left side of the machine to control the stroke distance for the slider.It is composed by parallels,angle iron,induction block and contactless switch.Two parallels iron is fixed in the worktalbe and top rail to fix angle iron,there are guide groove in the angle iron ajust the travel switch and the stroke of the slider will be controlled.

7.Hydraulic pressure station

The hydraulic pump is composed by fuel tank,axial plunger pump,motor,two way cartridge valve,oil filter and air cleaner:

(1)The tanker is welded by Q235 Steel,the front end is equipped with a pressure gauge for a easy obersation of the pressure and pressure-adjustment.In the lower part of the bracket is equipped with a pressure gauge level gauge, to observe the level.Open the upper cover ,for fuel filling.In the fuel tank is provided with a cleaning mouth, open cover capable of cleaning the tank.

(2)Fuel tank for the steel plate welded structure, by shot peening and rust prevention treatment,there are clean mouth in the side of tank and oil level ruler.The air clear,valve integrated blocks are in ordered arrangement in the top of tanker cover.

(3)The main hydraulic piping with flange connection, with reasonable layout of the seismic pipe clamp to prevent pressure pipeline vibration and leakage.Before the pipeline installation,there will be process of pickling and passivation treatment to guarantee oil cleanliness.

(4)Axial plunger pump

The hydraulic system use YCY14-1B axial plunger pump,the main specification and instruction is included in the axial plunger pump manual.

(5)Two way Cartridge Valve

The structure include Inserting piece,control panel,piot control valve and Integrated valve block

A.Inserting pieces is composed by valve pieces,spring,seal,valve pocket.It can be cone valve or slide valve structure.Main fuction is to control oil flow direction,pressure and flow rates n the oil pipe.

B.Control panel is composed by embedded various pilot control and other components in the cover panel.The main function is to fix inserting pieces.The Pilot control and other components will integrated with other pilot valve to control the inserting pieces working status.The control panel is divided into directional control cover plate,pressure control,flow control cover plate.

C.pilot control valvei is fixed in the control cover to control the movement of the plug of small diameterelectromagnetic reversing valve.The element is standard directional control valve.

D.integrated valve is to used to install the plugin,control and other control valve cover.

Hydraulic System

Hydraulic System is composed by energy conversion device(Pump and hydro-cylinder) and energy delivery device(Tanker and pipeline).By means of electrical control system,drive slide block to complete a variety of operation cycle.The hydraulic system uses large flow cartridge valve.In the pump inlet equipped with oil fume filter to prevent impurities from entering the hydraulic system and guarantee the normal working of the oil-way.System equipped with oil-level display and oil-temperature display and also air filter.Tanker is steel welded,tanker side has cleaning window,bottom equipped with plug screw forOil drain and sewer.

To prevent the slider out of control and be down,the machine equipped with Hydraulic support safety circuit.In a piston master cylinder cavity adopts hydraulic support safety circuit to make sure the sercurity.

This machine has the adjustment, semi-automatic mode choose.

8.Electrical control system

(1)The machine has independent electrical control cabinet and moveable button station.

The electrical control cabinet is used to equip Power control unit,for example,The control of total power and motor starting control element and also Protection switch and a leakage protector.There are Ventilation facilities within the cabinet and with a good seal to provent the ingress of the dust.The installation location of the cabinet should be instructed by the buyer(The producer or the supplier will notify in advance)

Operation station has operation button and function switch button for action of every part,the motor start and stop button and alarm and monitoring indicator to grasp the working state of the machine.

Moveable button station has the button for two-hand press,return,emergency stop,back.

(2)the machine standard power is AC380V/50HA,control electronic power is AC220V,Pilot valve magnet power supply for DC24V.

How about your machine quality?We are worry about the quality.

SIECC is a mature brand in CHINA,through our many years research in technology,our design including structure and detailed sercurity and precision has enhanced greatly,and can match all the CE standard or more strict standard.Our machines distribute worldwide to about 50 countries where there are metal plate industry ,there are SIECC machines.And where there are our machines,there are good reputation and terminal user satisfaction.

Whether the machine price can be more discount

SIECC always provide high quality machine,as we know ,oversea market is more important and difficult than domestic market because of communication time costing after sales,So always,our machine has enough qaulity standard to make sure the machine can work more than the real warranty period.In this way ,we will save a lot and think in advance for the clients.
Actually SIECC also think about our price level,we are sure to provide quality=price and pice=quality ,the matched price and acceptable for the clients and durable for our machines.We welcome your negotiate with us and get a good satisfaction.

How about your manufactory in CHINA

SIECC located in HAIAN CITY,NANTONG,JIANGSU province who is the leading area in China and also in the worldwide as the center of the metal plate solution machines,We have worked about 10 years in this area and totally have about 150 staffs.Rich experience in this field with professional technical supporting and oriented service.
We welcome your visit to us any time.

Do you accept L/C payment term?

Yes,we accept 100% L/C at sign from almost all countries.