Expert for pre insulated duct CNC cutting machine.

INFO CENTER

VENTECH research and development plus a strict quality control program have been fundamental to our growth, success and reputation.

Home  > INFO CENTER  > NEWS  > 

Router? No! You Need Professional Cutting Machine!

Router? No! You Need Professional Cutting Machine!

2021-08-13

Nowadays cutting machines are widely used in HVAC, engineering and construction industry. What do you know about them? That they cut things like paper? That you can cut everything with one machine and one knife? Let me show you some knowledge of cutting machine.

On market, there are several kinds of cutting machine, pre-insulated duct cutting machine, laser cutting machine, soft material cutting machine, router, etc. They are for different use, and VENTECH manages to make each one professional and exquisite.

 

Router

You may want to get a router if you have several different materials to cut, but how do you know about it? Router is relatively cheap and can cut many materials, but there are a lot of limitations.

·The knife always got damaged due to handling different hard materials, so you need to change it frequently.

·When cutting metal sheets, you can only cut thin ones, but not thick ones.

·You can't cut foam types with a router.

·When cutting acrylic and PVC, there will be problems of rough edges and burr.

·It is most suitable for cutting hard and thick PVC.

You can surely use a router to deal with a lot of things, but you may get lousy cutting job and easy broken knife heads, which will cost you a lot more than the money you save from buying it instead of specific cutting machines!

 

Pre-insulated duct cutting machine

Did you notice the air ducts on the ceilings when you are shopping? The traditional air ducts are made of metal sheet. Now we are using phenolic panel to replace the old materials. With a number of advantages like light weighted and good at saving heat, this new material is going to be more and more popular. You could try to use our VENTECH phenolic panel, which we guarantee you the best quality and it will surely give you a new impression for air duct.

For this new material, we use a machine called pre-insulated duct cutting machine to handle it. The machine has a lot of strengths. It can cut any shape, curve angle or straight; it has rapid manufacture of ducting components; it can reduce material waste; it can complete dust removal while working.

Matching with our own VENTECH automatic nesting software, you can totally save a lot of TIME, RAW MATERIALS and LABOUR! There are all patterns of air duct in the software. As long as you choose the patterns you want and type in sizes, it can arrange and adjust those patterns’ position on the phenolic panel automatically. How easy is that! The advantage shows especially when you have big production. If you are interested, our sales crew will makes sure you get the detailed information and best experience.

 

Laser cutting machine

Our fiber laser cutting machine can professionally cut metal sheet, as well as thick ones, and the edge is very good without burrs. There are some traditional cutting machines for cutting metal, like CO2 laser cutting machine and plasma cutter. They are relatively cheaper than fiber laser cutting machine, but there is a good reason for that.

At present, fiber lasers are mostly used from a few hundred watts to thousands of watts, while the common CO2 laser is mainly in the power range of 80W to 600W. The photoelectric conversion efficiency of fiber lasers is higher than that of CO2 lasers. In terms of cutting quality and speed, fiber lasers are better than CO2 lasers; in terms of use and maintenance costs, fiber lasers are lower than CO2 lasers; in terms of one-time investment, fiber lasers are slightly better Higher than CO2 lasers; in addition, both fiber lasers and CO2 lasers require chillers to cool them down.

Plasma cutter is a kind of thermal cutting equipment. Its working principle is to use the heat of high-temperature plasma arc to locally melt the metal at the incision of the workpiece, and use the momentum of the high-speed plasma to remove the molten metal to form an incision.

Laser cutting, because the traditional mechanical knife is replaced by an invisible beam, the mechanical part of the laser head has no contact with the material, and will not cause scratches on the material surface during work; laser cutting speed is fast, the cut is smooth and flat, and generally does not need subsequent processing; small cutting heat-affected zone, small plate deformation, narrow slit (0.1mm~0.3mm); no mechanical stress, no shearing burr; high processing accuracy, good repeatability, and no damage to the surface of the material; CNC programming, Any plan can be processed, and the whole board with a large size can be cut without creating new mold, which is economical and time-saving.

 

 

Soft material cutting machine

Our soft material cutting machine specializes in cutting foam, acrylic and other materials, and the edges are clear and complete, but it cannot cut hard PVC.

The soft material cutting machine looks similar, but the most important part is the blade. The difference in machine prices in the market lies in the technology of the blade. A good cutter head is stable and durable, and it can be seen that the cut is very neat and perfect especially when cutting thick materials. Our cutter head was launched into the market after a long period of research and development and testing.

Regarding working table, they are pretty much the same on the market. However, the adsorption capacity (adsorbed material is not easy to move) is related to the motor. Our motors are imported from Europe, for which we can guarantee you the best quality.



           



           

Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP