E-mail:Machine@chinaventech.com Expert for pre insulated duct CNC cutting machine.
In today's advanced technology, there are hundreds of manufacturers in China that produce and assemble laser cutting machines, and some say there are thousands. Looking at the prices of laser cutting machines from different manufacturers, I can’t help asking, these machines are very similar, why are the prices so different? When choosing a laser cutting machine manufacturer, we must keep our eyes open. Below, Hongte analyzes from an objective perspective and provides some suggestions for friends who buy laser cutting machines.
Selection of laser cutting machine equipment
Laser cutting machines are mainly used to cut carbon steel, stainless steel and other metals, but they have limitations in cutting high-reflectivity materials such as copper and aluminum. Currently, based on the laser power, we follow the coefficient of 0.6-0.8 to select the required laser cutting machine model. For example, if we buy a 1000w laser cutting machine, the thickness of carbon steel that can be cut in batches is 6mm, and the maximum recommended cutting amount is 8mm. We want to buy a 4000w laser cutting machine, which can perform 24mm batch cutting, which is difficult Make a 32mm cut. The higher the power, the lower the coefficient due to the limitation of laser cutting. At 8000w or 10000w, the coefficient can be around 0.4-0.6. This coefficient means that in the case of batch cutting, the cutting thickness limit of the equipment is not within this coefficient. The cutting thickness of stainless steel is usually half that of batch cutting of carbon steel. For example, 4000w batch cutting carbon steel is 24mm, and then 12mm stainless steel can be processed in batches, which has the best cutting effect.
After determining the laser power, the machine size must be determined. It is mainly divided into two parts, an open type and a completely closed interactive. The normal size is 3 * 1.5m, 2 * 4m, 2 * 6m, 2.5 * 6m, 2.5 * 8m and customized models with format. Compared with the open type, the interactive laser cutting machine can increase the processing efficiency by about 30 times. For customers with larger processing capacity, you can choose the interactive laser cutting machine type. This model is also the flagship model of traditional manufacturers, and the price is 30w-50w higher. For high-power models (above 6000w), we recommend configuring dual desktop devices. High-power equipment has higher requirements for machine tool performance.
u200bHow to choose a laser cutting machine manufacturer
At present, there are many domestic laser manufacturers. The main production method is to purchase machine tools produced by outsourcing units and assemble electrical parts by themselves. There are also individual manufacturers who produce few machine tools themselves, and most people buy machine tools from outsourcing units to confuse customers. It is recommended that consumers go to the manufacturer for on-site inspection when buying, instead of listening to the seller. Due to the uneven quality of sales staff, there are often differences between the verbally promised equipment and the actual delivered equipment. In the current fierce market competition environment, depending on the manufacturer's choice, there will be dizzying situations. Choose to engage in laser cutting machine production, sales for more than five years, annual sales of no less than 100 million yuan, and the number of employees is no less than 100 production enterprises. Smaller companies have very little resistance to risks, and their technology and after-sales capabilities are also weak, so they cannot fully protect the rights of customers.
The four main components of a laser cutting machine are laser, cutting head, machine tool and electrical components. These four parts are closely related and independent of each other. Related to this, high-power lasers must be equipped with high-specification cutting heads, high-performance machine tools and high-configuration electrical components to enable the equipment to achieve stable and efficient performance. Regardless of other settings, these settings have a relatively large range, such as high power. The middle electronic part of the laser can also be provided. The high-power laser is equipped with a medium-sized cutting head and a slightly lower machine tool. All of these are possible. In this way, the price difference will be large. In addition, the difference between the imported configuration and the country configuration is also great. Therefore, if you choose a device with a power lower than 2000w, you can choose the configuration of major domestic brands, so the cost performance is higher, and the performance is almost the same as the imported configuration. For the power of 2000-4000w, you can choose the setting method that domestic brands and imported brands want to match, such as domestic lasers with imported cutting heads; for equipment with power greater than 4000w, it is recommended to choose the configuration of the main imported brands on the equipment. There are some advantages in terms of performance and stability.
If you are looking for convenient, affordable , VENTECH brings plethora of options to suit your requirements and budget both. Check Ventech Automatic Machine for more details.
If you cannot find the specific type of that is best for your business in the above mentioned guide, you can visit Ventech Automatic Machine for the best consultants specializing in this field, who can recommend the your are looking for. Customization is warmly welcomed here.
Many of the INFO CENTER listed here can be purchased for less money, but in general we recommend paying a slightly higher price for significantly improved performance. These are our top choices and their recommended configurations.
More Recommendations:
Quick Links
Products
Contact Us