Better Touch Better Business
Contact Sales at VENTECH.
In the actual use of the laser cutting machine, most of the customers may have a series of failures due to improper operation and other reasons. In this case, there may be many people. I don’t know how to deal with it. Sometimes the failure of the entire equipment is relatively small, but it is precisely because of these relatively small failures that it can cause a certain delay in production, and even cause a certain loss. Face these failures How to deal with it, let's take a look together.
Fault 1: Turn on the button, the device does not work
If the laser cutting machine is in the process of working, the first thing to check is Whether the entire device is powered on, if it is not powered on, be sure to plug in the power supply. The parameters of the main board of the laser cutting machine should also be checked for correctness. If not, be sure to refer to the relevant software and some other parameters for understanding.
Failure 2: No laser under working condition
In the actual work process of the laser cutting machine, effective inspection should be carried out according to various conditions. It is possible that the laser cutting machine This situation occurs because the optical path has shifted. In this case, the optical path needs to be adjusted, or there may be a series of problems with the line. Then, if this is the case, you can pass the point The way of ray is plugged into the model of the power supply to judge.
Trouble three: Laser intermittent
When the laser cutting machine is working, there may be intermittent conditions. It may be that the water circulation is not particularly smooth. Check and clean the relevant water tank. Whether the first water pump is unobstructed, it is best to unblock the water pipe regularly.
Copyright © 2019 Yingde Ventech Intelligent Equipment Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.