The advantages of enveloping laser cutting machine

The enveloping laser cutting machine is currently the mainstream model on the market. It has the following advantages:

Prevent laser damage to the eyes

In the international laser classification, it can be used for cutting The laser is generally classified as three or four lasers, not only is forbidden to view directly, and its scattering power cannot be underestimated. Novices like to stare at the cutting head when operating a laser cutting machine. Over time, it will cause eye damage and tingling.

In addition, the laser has good monochromaticity, and the chromatic aberration in the fundus is very small. Very low laser energy irradiation can cause cornea or retinal damage.

The surrounding structure of the laser cutting machine allows the maximum separation of the laser and the operator. After adjusting the parameters and cutting the sample to the standard, the side door of the cutting machine can be closed to perform full-enclosed cutting to avoid damage to the human body caused by the laser.

Prevent smoke and dust from harming the human body

Laser cutting is thermal cutting, and a lot of smoke and dust will be generated during the cutting process. Although laser cutting machines are generally equipped with dust removal devices, there are still Some smoke and dust escape, causing pollution to the working environment and harm to the operator's body.

The surrounding structure of the surrounding laser cutter allows negligible smoke to escape.

Prevent mechanical damage

Although laser cutting machines use lasers instead of blades as processing tools, the probability of mechanical damage has been greatly reduced, but there is still no 100% guarantee that accidents will not occur. The enveloping laser cutting machine can completely isolate the processing structure, processing material, conduction device, etc. from the operator, thereby minimizing the risk of accidents.

Although the enveloping laser cutting machine has many advantages, the operation should be strictly abided by the specifications, such as wearing goggles, dust masks, gloves, etc. Safety production first, this must be kept in mind at all times.