The basic situation of the case project and the principle of system construction:
This paper takes the energy station in the terminal area of an airport as an example to discuss the strategies and practices for improving the energy efficiency of the energy station based on the principle of overall energy conservation of the system.

1. Process requirements
1) The flange of the air duct is processed by the mold method, and the flange of the same type uses a mold to ensure the interchangeability and dimensional accuracy of the flange;

According to statistics, the energy consumption of HVAC systems in public buildings accounts for 30% to 50% of the total energy consumption. The energy consumption of the energy station accounts for about 50% of the HVAC system, and there is a large space for energy saving, which is a hot spot in the industry at present.

1. Process requirements
1) The outer diameter or outer length of the air duct shall prevail, and shall be welded;
2) The weld seam of the welded air duct should be flat, and there should be no cracks, protrusions, penetrating slag inclusions, air holes and other defects. The deformation of the plate after welding should be corrected, and the welding slag and spatter should be removed;

19.Economic heat transfer resistance: It is the heat transfer resistance when the sum of the building envelope and unit area construction cost (depreciation cost of initial investment) and use cost (heating operation cost and equipment depreciation cost apportioned by the unit area of the envelope structure) reaches the minimum value. thermal resistance

Modified phenolic formaldehyde is made of non-woven fabric and phenolic formaldehyde through continuous compounding and compounding, and it is compounded and compounded.

Galvanized steel
1. Process requirements
1) Bite connection or riveting should be used, and welding is not allowed;
2) The joints of the air duct panels should be staggered, and there should be no cross joints.

PIR Pre-insulated Duct is a high-tech foamed PIR duct panel, which is uniformly sprayed on color steel, aluminum foil, aluminum sheet and other surface materials by PIR raw materials, and foamed at a certain temperature.

Energy efficiency ratio: The energy efficiency ratio of an air conditioner is the ratio of cooling capacity (heating capacity) to operating power. That is, the mathematical expressions of EER and COP: EER=cooling capacity/cooling power consumption. COP=heating capacity/heating power consumption.

Polyurethane (PU) is the abbreviation of polyurethane, which is formed by addition polymerization of polyisocyanate and polyhydroxy polymer, and contains many repeating urethane segments (-NHCOO-) in the main polymer chain.

First, find out the air duct elevation according to the design requirements and refer to the civil engineering datum line.

Second, make hangers and high hanging points.

Ventilation, the "V" in HVAC, is often ignored. We pay great attention to heating and air-conditioning systems - their operation is critical to comfort, and heating and cooling can constitute an important part of the building utility bill. This can encourage people to reduce ventilation as much as possible, because the outdoor air must reach the indoor temperature and humidity level, whether in hot or cold weather, this is an expensive suggestion.