How to maintain the fiber laser cutting machine in summer?

In the relatively hot summer, if the temperature is relatively high, the air humidity will definitely be very high. Many machinery will inevitably have some failures, so people often think about sharpening knives and not cutting wood. Of course Sometimes, if you use fiber laser cutting machine in summer, you must do the related maintenance work. How should such a mechanical equipment be maintained in summer?

(1) Avoid condensation

During the actual use of the fiber laser cutting machine, the temperature of the cooling water or the temperature of the air is not It is not particularly large, because the laser or optical lens of the entire equipment should be processed by cooling water, and the water in the air may sometimes be condensed into water. If it is condensed into water, the temperature is basically If it is lower than the indoor temperature to about 5℃, the surface of the laser or the optical lens will also have more water leakage, which will affect the efficiency of laser extraction to a greater extent, or can affect the projection of the optical lens .

(2) Maintaining the cooling system

In summer, the temperature rises, and the working pressure of the cooling system of the fiber laser cutting machine is gradually increasing. Please check before you come. The internal pressure of the entire system and the pressures of different manufacturers will be different. It is recommended to check the specific parameters of the relevant manufacturers before the maintenance of these equipment. To some extent, the temperature in summer is relatively Higher, the deterioration rate of the cooling water will gradually accelerate, even such a device uses distilled water or some other pure water, and the scale should be cleaned regularly.