Five small methods to improve the service life of fiber laser cutting machine

Compared with other cutting machine equipment, fiber laser cutting machine has better processing effect, but the corresponding operation method also has stricter requirements. Therefore, if the equipment can work normally and the cutting quality is better, then It is necessary to control the correct way of use, so the following editor will teach you the five-point equipment use skills to help you better control and use the equipment. (1) The dual-focus laser cutting head is an easily damaged part of the cutting machine equipment. It is used for a long time and is likely to cause damage to the laser cutting head. (2) Check the straightness of the trajectory of the fiber laser cutting machine and the verticality of the machine every six months. If it is found to be abnormal or not in time, it should be repaired and debugged quickly. If you do not do this, the cutting effect may be poor, and the error may increase, which will affect Cutting quality. This must be paid attention to. (3) A vacuum cleaner should be used to remove dust and dirt on the machine for a week, and all electrical cabinets should be strictly closed and dust-proof. (4) Check the steel belt of the fiber laser cutting machine frequently to ensure the tension. Otherwise, there will be problems during operation, which may hurt people, or even cause death in serious cases. The steel strip looks small and the problem is still a bit serious. (5) The guide rails of the fiber laser cutting machine should be cleaned regularly to remove dust and other debris, and the normal frame of the equipment should be wiped regularly, and lubricating oil should be added to ensure lubrication and no debris. The guide rail should be cleaned frequently and the motor should be cleaned with lubricant. The machine will be better at the moving position. The more precise the cutting, the better the cutting quality of the product.

So when you control the use of fiber laser cutting machine, we can cooperate with these five methods to help ourselves better control the cutting machine equipment. At the same time, we should pay attention to every use of the cutting machine equipment, we must do a detailed inspection work to avoid the internal safety risks of the equipment and fail to find out in time.