Daily use and maintenance tips of laser cutting machine

In order to ensure the normal use of the laser cutting machine, daily maintenance and maintenance of the equipment must be carried out. Master the operation essentials of the equipment, you can easily cut the workpiece effect you want, and extend the life of the laser cutting equipment. The following are some tips for daily use and maintenance.

First of all, the laser is the core equipment of the laser cutting machine. It provides the cutting light source for the laser cutting machine; in order for your laser cutting machine to work normally and with high quality, to ensure that your laser can run reliably and extend the laser The service life, remind you to check and maintain your laser regularly. The fiber laser can basically be maintenance-free. In addition to ensuring the surrounding area is clean, the main daily observation is whether the cooling water is normal and the voltage is normal. If there is any abnormality, please call 400-166-1119 for technical consultation in time.

The second is to pay attention to the maintenance and maintenance of the lens. Do not touch the focusing lens, protective lens, QBH head and other optical surfaces directly with your hands to prevent scratches or corrosion on the mirror surface. It is strictly forbidden to clean the surface of the optical lens with water or detergent. The surface of the lens is coated with a special film. If you use these to clean the lens, it will damage the surface of the lens. Do not place the lens in a dark and humid place, as this will cause the surface of the lens to age. When installing or replacing the reflector, focusing lens and protective lens, do not use too much pressure, otherwise it may cause the deformation of the lens and affect the quality of the beam.

Third, pay attention to the maintenance of machine tools. Before the machine is put into operation, the machine must be carefully lubricated according to the lubrication instructions. Using the most suitable lubricant for professional lubrication is a prerequisite for maintaining the quality of the machine tool, so that operation failures and their consequences can be avoided.

If the machine tool has not been used for a long time (such as ocean transportation), the lubrication of the entire machine tool must be checked. In addition, when the machine tool is parked for a long time and not in use, please apply butter to the moving parts of the machine tool and wrap it with anti-embroidery paper. For other parts, check whether there is rust phenomenon, and perform rust removal and antirust treatment on the rusty parts (such as A dust cover can be added if possible), and the machine tool should be cleaned and inspected regularly.

Fourth, the entire equipment must be thoroughly cleaned within a specified time interval on a daily basis. Obvious dirt can be scrubbed after the machine is turned off, or removed with an industrial vacuum cleaner. The fueling and draining ports should always be kept clean. You must use a lint-free cloth to scrub the oil tank and lubrication points, and do not use waste wool.

This article is only a general description and does not cover the parts of the whole machine. In order to ensure the normal use of your equipment and prolong its life, please be sure to read the instruction manual and maintenance instructions carefully, and operate in accordance with the operating specifications. Please carefully perform the routine maintenance and maintenance steps in the user manual to ensure better and better long-term operation of the equipment.