Application of fiber laser cutting machine in home appliances

by:VENTECH     2022-02-19

Whether it is a washing machine, electric pressure cooker, rice cooker, etc., household appliances that are closely related to our lives and diet are playing an increasingly important role in the home. And these electrical appliances without exception will involve the material of stainless steel.


The application of stainless steel products in the home appliance industry is mainly the inner tube of washing machine, the inner liner of water heater and the inner lining of refrigerator, etc. Because stainless steel has excellent durability, strength and processability, at the same time, the appearance is simple and textured. Fewer refrigerators and cooker hoods are also made of stainless steel.




Stainless steel base and side of TV set




Stainless steel refrigerator




Stainless steel juicer



Currently, the output of my country's main home appliances has leapt to the forefront of the world. The output of refrigerators and washing machines accounted for more than 40% of the world, air conditioners and microwave ovens accounted for about 70% of the world, and small household appliances accounted for nearly 80% of the world. It has become a global home appliance. Large product manufacturing country and main supplier country. From 2014 to 2016, the output of my country's main household appliances (including washing machines, refrigerators and air conditioners) was 320 million units, 320 million units and 330 million units, respectively.


According to the 'Thirteenth Five-Year Plan' goal, by 2020, the GDP and the per capita income of urban and rural residents will double from 2010. The continuous increase of residents' income will drive the improvement of residents' living consumption. The application in civilian household appliances and other aspects has a large potential market, and this also brings new challenges to the processing technology of stainless steel products.



Traditional stainless steel cutting technology has problems such as tool wear, low processing efficiency, and easy to produce burrs, surface roughness, and deformation. In contrast, the advantages of laser cutting technology are more prominent and become the common choice of many stainless steel processing enterprises.



The advantages of laser cutting


1. No processing stress, no deformation of the workpiece


Using laser cutting equipment to cut is not affected by the hardness of the material. This is determined by the characteristics of the laser, which is an advantage that traditional equipment cannot compare. Laser cutting can be used for steel, stainless steel, aluminum alloy, and hard The alloy plate is cut without deformation.



2. No need for secondary treatment, high processing efficiency


Using laser cutting equipment to process stainless steel plates, using non-contact processing methods, will not affect the deformation of the workpiece, and will not affect the progress of the next process, and there is no need for secondary processing after laser cutting. , The cutting surface is smooth.



3. Better positioning accuracy and better cutting effect


The laser beam is focused into a small spot, so that the focal point can reach a high power density. The material is quickly heated to the degree of vaporization, and the evaporation forms a hole. The beam quality is good, and the positioning accuracy is better. Therefore, the cutting The accuracy is also higher.



4. No tool wear, low maintenance cost


The use of laser cutting machine to cut stainless steel is lossless, the cutting photoelectric conversion rate is high, the processing cost is lower, and the fiber laser cutting machine is maintenance-free.



Among many laser cutting machine brands, HGlaser has the leading quality and superior cost performance. The new product MARVEL6000 series laser cutting machine has been popular in the market once it was launched and has become the leader in flat fiber laser cutting machines.



The core light source is manufactured independently, and the procurement cost is reduced by 15%-20%;


With ultra-high cutting efficiency, 600 round holes with a diameter of 2mm can be cut per minute for 1mm plates;


Covering 100% of the metal material blanking needs, effectively meeting various needs in home appliance processing, and helping Chinese home appliance brands move towards a higher end.


The global market was valued at powder coating machine for sale in powder coating system for sale and is expected to reach a market value of assembly machine manufacturers by punching machine manufacturer, with a CAGR of powder coating machine price during the forecast period.
See reviews of the latest trend in INFO CENTER industry at Ventech Automatic Machine, and see the best that work in just minutes! Visit us right away!
YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. emphasizes our commitment to quality in our laboratory and R&D services.
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP