loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

Wiring method of fiber laser cutting machine

When installing the fiber laser cutting machine, its wire connectors must be installed correctly. Otherwise, the wrong installation cannot affect the normal use of the cutting machine equipment. Therefore, the following editor will discuss the wire connection method of this device.

Preparation for the grounding device:

1. The grounding system must be 2-4x1500mmx35 degrees, and all the damp and cold areas around the house, each distance is 1 meter, and then apply 3. ×30 mm flat steel guide rail digs the connection head in the foundation pit every time, producing an excellent grounding device Internet.

2. After the road connection is completed, the road resistance of the road resistance is correctly measured with the dashboard. The standard resistance is 3 to 5 Euro mothers.

3. After measuring the resistor accurately, connect one end of the rvv2.5mm2 copper core cable to the wire end of the grounding device Internet, and insert it into the ground hole of the power socket used by the fiber laser cutting machine.

Installation process:

1. First look for a damp and cold area at home, excavate the surface of 1.5 square meters * 300mm soil layer, and then prepare the perspective universe in advance, 2x30mm flat steel and 7mm The electric welding or screw connection of holes, the road surface exceeds 1.8 meters, and the cemetery with clean soil.

2. Use the tester to accurately measure the grounding resistance of the Internet.

3. Drill an 8mm hole on the top of the iron, file around the hole, and then apply the pituitary gland to tighten the thin iron wire and flat steel.

4. Lead the fiber laser cutting cable into the customer's wire trough, and improve the safety of the wire connector on the power grid.

Therefore, when performing wire joint operations on the fiber laser cutting machine, you must make preparations before wiring and wire in the correct way to ensure that the wire joints are carried out correctly.

INFO CENTER are all following the most compatible manufacturing regulations.

We would appreciate your immediate attention to INFO CENTER.

The first step toward VENTECH’s successful selling campaign is to understand your customers. What are their needs or desires? Why would they support your product? Even more importantly, why would they be passionate about your product?

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect