Why are nearly 10 old-fashioned machine tools and equipment less than 1 laser cutting machine? What's the reason?

Nowadays, the laser cutting industry is highly competitive. There are hundreds of large and small companies mainly in Shandong, Guangdong, Wuhan and other regions; as the track enters the white-hot stage, we will hear that many manufacturers in the market will say : Laser cutting machine can replace punch, plasma cutting, flame cutting, sawing machine and many other machines. It can be described as one machine with multiple functions. Such exaggerated propaganda actually runs counter to reality, and can only say that each has its own strengths; choose the most suitable one according to your needs!

Let’s tell a story first. We encountered a case before. The boss made a battery box with two motherboards on the front and rear, but there were about 20 holes in it... This feels very similar to blinds. Similarly, a small fan and screw holes are needed to dissipate heat inside. These processes were previously done with a punching machine, and the molds of the punching machine need to be customized; when other customers propose to change the position of the hole, it means that his mold needs to be remade.

Such a high cost itself is wasteful and has great limitations. It is also difficult for you to broaden the product line, but after using a laser cutting machine, think about perforation You can change whatever you want, so that the cutting efficiency has been doubled several times. It took only 23 seconds to cut out this part with a laser cutting machine, usually 36 seconds; this efficient way is the result of the correct application of the laser cutting machine.

1. What are the differences between plasma, flame and laser cutting machines?

In the cutting of medium and thick plates, plasma cutting has advantages over lasers. Finally, it can cut to 150mm. The cutting accuracy is better than flame cutting, but it is worse than laser cutting. Its cutting accuracy is 0.25-2.5mm , And today's laser cutting machines can reach ±0.03mm (obvious advantages for thin plate cutting).

Compared with plasma and laser cutting, the obvious advantage of torch cutting machine is that it is suitable for cutting thick steel, up to 400mm; the investment cost is low. In addition, the advantages of cutting accuracy and speed are not so obvious, and there are certain limitations in cutting materials.

2. Can the punching function of the laser cutting machine really replace the punch?

70% is okay. There are many molds used in the punching machine, and each replacement requires a lot of manpower, material resources, capital, etc. For deep drawing, extrusion, shaping, the laser cutting machine cannot be replaced, but the punch itself cannot cut complex curves and excessively large holes; and the laser cutting machine can fill this part of the short board. The so-called complementary advantages, the laser cutting machine can complete the cutting of perforations and intersecting lines; the diversified cutting methods can be set according to the drawing to complete the processing requirements, no separate mold is needed; this is an obvious technology of the laser cutting machine Advantage. .Nowadays, manufacturing and processing can not be completed by a single machine, just like we need to match jackets, trousers, and shoes when we go out to call it a set. For the processing of thin-walled metal profiles, laser cutting machines are a good choice for cutting and drilling! However, if the cutting thickness is several hundred millimeters, flame cutting is more suitable, and the specific problems are analyzed in detail!

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.’s administrative systems and management team are extraordinary-you'll need them to get a new location up and running.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD., to be the world leader in products, services and solutions that enable and transform the way consumers and businesses gather, manage, distribute and communicate information.

INFO CENTER are less complex compared with powder coating system for sale.

In business, INFO CENTER means cultivating brand loyalty; once someone is working with a product or using a service, they are more likely to commit to paying for VENTECH again.

The rising punching machine manufacturer consciousness observed worldwide are expected to be key factors driving the demand for powder coating machine for sale INFO CENTER.