What to do if thermal deformation occurs during the working process of metal laser cutting machine

Customers who are always dealing with cutting machines will always encounter the phenomenon of thermal deformation of laser cutting machines, CNC flame or plasma cutting machines, in fact, it is not like that. Regardless of CNC flame cutting or laser cutting, the width of the cutting edge is affected by various reasons such as the cutting nozzle, even if the laser cutting machine is imported with millions of huge amounts of money, it can only be so.

First, after controlling the temperature rise and choosing relevant methods to reduce the heat source, the thermal deformation of the metal laser cutting machine will be significantly improved. A more useful method is to forcibly cool the heating part of the CNC plasma cutting machine. According to the heating method of the low temperature part of the lathe, the temperature of each point of the lathe will be close to the same to reduce the deformation caused by the temperature difference. But it is extremely difficult to deal with this problem from the bottom, so the only way to reduce the influence of the heat source is to control the temperature rise. Due to the up-and-down correspondence, the main shaft of the double-column unit after heat absorption undergoes a vertical angle translation, but the deformation of other angles is small, and the axial movement of the vertical angle can be conveniently handled by a calibration amount of a coordinate.

Second, improve the lathe unit. Under the same heating conditions, the lathe unit of the metal laser cutting machine also has a great influence on the thermal deformation. The structure type should also minimize the distance between the spindle center and the spindle to the ground to reduce the total amount of thermal deformation. In addition, the temperature before and after the spindle box should be the same to prevent the spindle from skewing after deformation. This can reduce the influence of the thermal deformation of the spindle on the machining diameter to a low degree.

Third, the heat source for thermal deformation inside the lathe must be separated from the host. The thermal deformation of the shaft occurs at the vertical angle of the cutting tool. For example, the single-column unit used in the CNC machine tool of the metal laser cutting machine can be replaced with a double-column unit. It is necessary to learn more about this knowledge, regulate regulation, and reduce possible thermal deformation effects. As a kind of hot cutting equipment, CNC flame cutting machine will cause structural deformation due to temperature changes during frequent use and processing. Under normal circumstances, the thermal deformation phenomenon of the laser cutting machine can be alleviated by operating in accordance with the above article, without having to worry too much afterwards.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. works very hard to understand your objectives, then create a program that can help you meet them.

Now you can enjoy punching machine manufacturer with YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.'s latest collection of powder coating machine price INFO CENTER products. Do visit now, at Ventech Automatic Machine.

Equipping INFO CENTER with innovative technology and updated processes will simplify daily compliance duties so that they can focus on attracting, retaining, and developing the most engaged workforce possible.

Even INFO CENTER are being made fine with advanced equipment.

Do you want to find a provider to get your INFO CENTER problem settled? If so, we suggest that you give a shot to YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.. Visit Ventech Automatic Machine to learn more and contact us.