What should I pay attention to when operating the fiber laser cutting machine?

Today's fiber laser cutting machine equipment manufacturing industry is progressing rapidly. In the scientific and technological innovation of fiber laser cutting machine equipment, the equipment of professional fiber laser cutting machine equipment manufacturers has been selected to upgrade the professional laser The development of cutting machine equipment manufacturing industry, among which metal materials can be cut, is because the laser wavelength can be absorbed by these materials. When cutting other metal materials, the cutting parameters of different materials must be selected.

For cutting different materials, fiber laser cutting can get better results. When the laser beam is used as a processing method, the cutting edge will be slightly oxidized and can be used for high-pressure cutting of different thickness plates In this case, use the special laser device of the steel plate fiber laser cutting machine to grease the surface of the workpiece during the processing process to make the effect more good. The laser beam is needed when cutting stainless steel, and the edge oxidation is not important. In the case of, no further processing is required, and better results can be obtained without reducing the processing quality.

According to the alloy type and laser capacity, it has high reflectivity and thermal conductivity. When cutting with a laser beam, the cutting surface is rough and hard. Nitrogen is used to make the cutting surface smooth. When the fiber laser cutting machine is cutting synthetic materials, please pay attention to the danger of cutting and the harmful substances that may be discharged. The synthetic materials that can be processed include metals, plastics, etc. Now there are many laser cutting devices, and there are other types of fiber laser cutting machines. equipment.

For example, CO2 fiber laser cutting machine and precision fiber laser cutting machine, etc., the lasers used are not only different, but also very different in use. Different materials have different characteristics, and different types of lasers can absorb lasers. The degree is also different. Some materials absorb the laser of this wavelength. When using a fiber laser cutting machine, for better processing, the cutting characteristics and requirements must be determined.

Nowadays, the adoption of INFO CENTER in assembly machine manufacturers industry is quite common.

Always do our research, follow the rules and plans ahead for additional expenses. Expanding is the goal of YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.; expanding properly is the goal of the wise business.

Based on the INFO CENTER, here are the top compliance challenges businesses face, and what you can do to make them easier on ourselves.