What's wrong with the deformation of the finished fiber laser cutting machine?

Fiber laser cutting machines can often complete tasks very well when processing metal materials. The cut metal materials are very good in terms of cutting surface and accuracy. However, after some people use fiber laser cutting machines to process metal materials, the processed products have deformation problems, which makes many people very distressed. So what happened to the deformation of the finished fiber laser cutting machine? How to solve it? After reading the content below, you will understand!

What happened to the deformation of the finished fiber laser cutting machine?

1. The fiber laser cutting machine itself is a large-scale cutting equipment composed of multiple components. When the core component fails, it is normal to affect the processing quality of the metal material. This only needs to be repaired in time.

2. The fiber laser cutting machine does not guarantee that the processed workpiece will not be deformed at all, but compared to other cutting equipment, the material deformation is much smaller. If there are some very subtle deformations, it is obviously attributed to the equipment itself. Is unreasonable.

Three: The material and thickness of the metal material do not match the equipment. The material and thickness of the material are often the biggest cause of deformation. Some materials may be highly reflective. Fiber laser cutting machines generally need to be processed when cutting this material. Cutting without processing will be affected to a certain extent, and the thickness does not match the power of the equipment, which further affects the machine. Processing quality, these factors will cause the material itself to be unevenly heated and deformed.

Four: The equipment has not been debugged well; although the fiber laser cutting machine is very technical, it is necessary to arrange for professionals to debug the entire machine before starting up. Many customers often ignore this point and fail to debug well. If you start the machine quickly, the cutting effect will of course be affected.

The above is the main content of the deformation of the finished fiber laser cutting machine. In fact, this situation may also be caused by irregular operation. We don't need to panic when facing this situation, just check whether there is a problem with the detection machine, whether the cutting points of metal materials are followed, and whether the cutting operation is standardized!

At a time when technology is essential for INFO CENTER, ensuring that it works in a symbiotic way with your human employees is key.

What are you waiting for? Get out there and buy some of the most effective at Ventech Automatic Machine.

The success of INFO CENTER of campaigns largely rides on how you market your company to the crowd.

In a nutshell, is actually an ultimate solution for assembly machine manufacturers and underestimating its value cost you higher than anything else. So grab it before you miss the boat.

punching machine manufacturer INFO CENTER quality is more important because some how it affects to our powder coating system for sale. So grab good quality .