What is the cutting ability of the gantry CNC cutting machine? After reading these, you have a clear understanding

The distance of the gantry CNC cutting machine in the CNC plasma cutting machine is generally 4 ~

10mm is equivalent to the shrinkage of the electrode. Only when the distance is appropriate can the cutting efficiency of the plasma arc be fully utilized, otherwise it will reduce the cutting efficiency and cutting quality or burn the cutting nozzle. On the CNC flame cutting machine, the height range is about 5 ~

12 mm.

　　 In order to ensure the cutting height, if the operator has limited experience, it is recommended that the user install an automatic height adjustment system to reduce the impact of misoperation. The actual processing speed is generally controlled at 300-400 mm/min. Compared with plasma cutting, the flame travel speed is slower. With the experience and technology of the operator, the verticality and quality of the cutting surface can be effectively guaranteed.

　　In actual processing, operators need to pay more attention to the control of flame temperature, which needs to be mastered by comprehensive cutting thickness. The CNC flame cutting machine is mainly embodied in two aspects of the cutting thickness. One is to control the temperature of the cutting flame, specifically to adjust the preheating time; the second is to replace the matched air pipe and gas circuit

　　 Generally speaking, cutting 120

For steel plates larger than mm, it is recommended to use tracheal gas path instead. Cutting large-thickness carbon steel has the ability to cut, and the cutting cost is low, but the cutting deformation is large, the cutting accuracy is low, the cutting speed is slow, the cutting preheating time and the piercing time are long, and it is difficult to meet the needs of fully automatic operation.

　　 Its application is mainly limited to cutting carbon steel and large thickness plates. Plasma cutting will gradually replace it in cutting thin carbon steel plates. The portable cutting machine is developed from the semi-automatic car cutting machine. The numerical control system and the transmission device are installed on the automobile cutting machine. Its basic appearance is similar to a car-style semi-automatic cutting machine. Gantry CNC cutting machine has low cost and light structure, which is especially suitable for small and medium-sized plate processing.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is devoted to satisfy our customers with a wide array of the finest using experience.

go to Ventech Automatic Machine to get an amazing offer at favorbale price. the INFO CENTER powder coating machine price actually works and is worth a try.

Overwhelming customers with too much information or the slew of benefits INFO CENTER provides–even if they're all valid–is a surefire way to lose their attention.