What are the requirements for the use environment of the fiber laser cutting machine?

When we use the fiber laser cutting machine, we must not ignore the relevant precautions. Among the problems that need to be paid attention to, its use environment is the most important, and it can only be used in an environment that meets the requirements. Let its performance be brought into full play. So how to operate the fiber laser cutting machine?

Because the use of fiber laser cutting machine involves electricity, gas and other energy sources, plus the dust formed in the material cutting process, it has certain requirements for environmental control. In the current domestic processing plant and use environment , There is a big gap in the environmental control of fiber laser cutting machine in terms of awareness and hardware facilities. Our company has served many mechanical processing enterprises for many years. The yc series plasma cutting machine produced is recognized by the majority of users and enterprises. Here we will put forward some opinions and suggestions on the environmental control of fiber laser cutting machine.

The plasma cutting machine will produce noise, smoke, arc light and metal vapor during the cutting process, which will pollute the environment. The situation is especially serious when cutting high current or cutting non-ferrous metals. There are several different equipment and technologies available to reduce this pollution level. In addition to water recompression plasma arc cutting, water surface cutting and underwater cutting are also effective methods to suppress environmental pollution.

Cutting on the water surface requires a water storage tank. The worktable used to place the workpiece in the water storage tank is composed of a number of ordered steel members with pointed tops, which support the workpiece to be cut on a horizontal surface. When the cutting torch is working, the plasma arc is surrounded by a layer of water curtain. In order to maintain a continuous water curtain, a circulating water pump is required to pump the water from the water storage tank and then into the cutting gun. When water is sprayed from the cutting gun, it forms a curtain of water surrounding the plasma arc. This kind of water curtain greatly controls the environmental hazards caused by pollutants such as noise, smoke, arc and metal vapor generated during the cutting process. The water flow required for this method is 55-75L/min.

Underwater cutting is to place the workpiece about 75mm below the water surface. The worktable on which the workpiece is placed is composed of pointed steel members. The purpose of choosing the top-shaped steel components is to make the cutting table have enough capacity to contain the chips and slag.

When the cutting gun is launched into the water, first use a steady compressed airflow to drain the water around the nozzle end of the cutting gun, and then ignite the plasma arc for cutting. When cutting under the water surface, keep the depth of the work piece submerged under the water surface. A set of water level control system should be prepared, and a water pump and storage tank should be added to maintain the water level by means of water injection and drainage.

Generally, a ventilation system should be equipped near the cutting or automatic cutting table of manual plasma cutting machine to extract the exhaust gas out of the workshop. However, the exhaust gas still pollutes the environment. If the pollution caused exceeds the national allowable standard, smoke and dust transition equipment should be added.

These are the specific requirements of the fiber laser cutting machine for the use environment. I wonder if you still have any questions about the use after reading it?

Over the years, has become very popular as more and more people are trying it out.

For more information please see our site at Ventech Automatic Machine. Don't be hesitate to contact us!

We are making INFO CENTER available to you at a very low price.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. knew the only way to remain competitive was to ensure quality of service and customer satisfaction above all.