What are the reasons for the low production efficiency of fiber laser cutting machines

The reason why fiber laser cutting machine is so popular in the sheet metal processing profession is because of its high production power, high cutting accuracy, and low labor cost. However, there are exceptions to everything. Many users report that the production power of the machine is not I imagined so ambitious, what is going on, let's take a look at the reasons for the low output power of fiber laser cutting machines.

1. The incision method is inappropriate. When cutting metal sheets, no cutting methods such as co-edge, borrowing, and bridging are used. In this way, the cutting method and cutting time are time-consuming to add, the production power will naturally decrease, and the amount of consumables will be added at the same time, which will lead to higher costs.

2. The cutting power does not match the actual cutting thickness. The corresponding fiber laser cutting machine is not selected according to the cutting thickness. For example, when cutting 16mm carbon steel plates in large quantities, the equipment purchased is 3000W power. Although this equipment can cut 16mm carbon steel plates, the cutting speed is only 0.7m/min. Long-term cutting will also cause the lens damage rate. The improvement will even affect the focusing lens, in this case it will lead to a decrease in the working power of the equipment.

3. No nesting software is used. The nesting software is not used when typesetting and cutting, but manual typesetting is performed in the system, and the parts are cut sequentially in the order of blanking. This will cause a lot of scraps after the plate is cut, the utilization rate of the plate is low, and the cutting path is not optimized, the cutting time is long, and the output power is low.

4. There is no active cutting process. There is no active cutting process and cutting parameter database in the laser cutting system. The cutting operator can only draw and cut manually based on experience. Active perforation and active cutting cannot be done during cutting, and manual adjustment is required. Over time, the power of the fiber laser cutting machine is naturally very low.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. shows how effective market design can encourage participation, reduce gaming, and aggregate information, in order to improve liquidity, efficiency, and equity in markets.

What are you waiting for? Get out there and buy some of the most effective at Ventech Automatic Machine.

You can get more information from Ventech Automatic Machine for on sale. welcome to visit us and send your inquiry!