loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

What are the reasons for the failure of the gantry CNC cutting machine?

Most of the working environments faced by    gantry cutting machines are harsh environments. Through the correct method, the core components of the gantry cutting machine can be well prevented from malfunctioning, and the failure rate of the gantry cutting machine can be greatly reduced. The core components of the gantry cutting machine should be protected when in use, and the core components of the cutting machine are very important. Next, let us understand the cause of the failure of the gantry CNC cutting machine, and hope to help you in front of the screen.

   Gantry CNC cutting machine failure reason:

  1. The ground vibration is large

   In the production of the machinery manufacturing plant, drag Physical displacement actions such as motion and vibration will not only bring huge noise, but also

The disk, optical drive and floppy drive of the gantry cutting machine cause greater damage. In the large amount of data exchange of the automatic control system, the disk that runs at a high speed for a long time is easily affected by the vibration transmitted to the disk, which causes the disk read and write ability to decline, the head positioning is slow, and the disk is even damaged. Therefore, the environmental vibration of the gantry cutting machine is reduced, which is beneficial to protect the disk. In engineering design, we can make

The laser cutting machine is as far away as possible from the work site with large earthquake sources; if the work site cannot be changed, we can also place sponges and buffers under the industrial control cabinet and box to reduce the damage caused by vibration.

  2. There are many inhalable particles in the air

   Most of the raw materials in many factories require powder to process. In addition, due to the large external air flow and dust, it is easy to collect a large amount of viscous dust in the gantry cutting machine, which causes the local temperature in the gantry CNC cutting machine to be too high, causing hardware damage. This situation usually occurs around cooling fans, such as processors, power supplies, hard drives, and graphics cards. Where dust accumulates lightly, if normal production permits, regular soot blowing can be used. For places with serious dust accumulation, the dust filter can be placed in the ventilated place of the laser cutting machine and cleaned regularly.

  3. The power supply voltage fluctuates greatly and it is prone to power failure.

Look at the trends, both economic and consumer, for indications on your YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.'s staying power.

Energetic, optimistic entrepreneurs often tend to believe that sales growth will take care of everything, that YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. will be able to fund our own growth by generating profits.

Oftentimes for YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD., this means look for the impact. Giving people something to believe in, that emotional connection, that's what INFO CENTER.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect