loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

What are the possible factors for abnormal cutting of CNC laser cutting machine?

   CNC laser cutting machine has obvious advantages. The cutting speed is relatively fast. In addition, the cutting gap is relatively small, so it can achieve higher efficiency and higher quality when used. It is suitable for processing workpieces. Relatively many, many of them are metal processing industries. However, there are often some unsuitable factors in the cutting process. Next, I will specifically introduce the possible factors for the abnormal cutting of the laser cutting machine.

  1. Laser tube deformation

  The laser tube is the main factor that determines the laser. Deformation sometimes causes cutting failure. Regarding its treatment plan, the laser tube is rotated several times, and it is not replaced by deformation, but treated with a good support angle.

  2. The light exit of the laser tube

   The laser tube of the CNC laser cutting machine is an important part that affects the cutting result, which determines the processing effect, cutting performance and other operations. In this case, the part to be inspected is the laser tube, which needs to be inspected for damage.

The laser cutting manufacturer recommends that if it is damaged, it needs to be replaced in time. If it is not damaged, it needs to be cleaned first. In this way, good results can be achieved in the later use.

  3. The focus lens is broken.

   The cutting speed is too fast, the focus lens is broken, the focus is poor, the optical path is not correct, and the voltage is unstable. The focus needs to be adjusted in time to prevent factors that affect the cutting accuracy.

  4. The optical path of the laser beam

   The optical path of the laser beam determines the intensity of laser irradiation. If the laser beam becomes weak during the transmission of the optical path, the cutting of the processing board may occur continuously. At this time, it should be detected whether the light path is at the midpoint and passes through the midpoint.

When the laser beam does not pass through the through hole, diffraction is prone to occur, and the power of the laser tube and the beam is reduced. In order to solve these problems, the operating current can be increased.

   The above are the possible factors for the abnormal cutting of the CNC laser cutting machine. You need to pay special attention when choosing the cutting, and it should not affect the normal use of the cutting machine. The laser tube of the cutting machine is Important factors that affect cutting, so you need to pay special attention to it, and can't affect the overall processing effect.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. has various branches in local businesses, servicing customers and helping to pull in traffic to those businesses.

You can find a large selection of quality at Ventech Automatic Machine. Go get your desired one.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD., which contributes itself on INFO CENTER for creating more useful application.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. usees sentiment analysis to understand what their customers care about and leverage that information to reposition their products, create new content or even provide new products and services.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect