What are the points to pay attention to when choosing a gantry CNC cutting machine?

　　 What problems should you pay attention to when buying a gantry cutting machine? In fact, when you buy a laser cutting machine, you have to determine what you need to use when buying a gantry CNC cutting machine, and what products will be processed with it , And what kind of effect needs to be achieved at the same time. The following is a summary of the five requirements, I hope to help you.

　　 Gantry CNC cutting machine purchase items:

　　1. Cutting speed

　　 We can only meet the premise of cutting precision Talk about speed. Due to the short cutting platform, it is difficult to visually judge whether it has reached a high speed. We can use the software simulation function of the servo driver of the cutting machine to check the speed of the TV. When testing the cutting speed, there is no need for actual cutting to increase the acceleration and deceleration. Each axis can be tested individually or simultaneously.

　　Second, automatic layout optimization function

　　 At the edge of the cutting machine, considering the processing cost and the particularity of the type of work, highly educated people will generally not be arranged to do it, this The operation of the cutting machine is required to be simple, easy to understand, and not too complicated, otherwise it will cause the embarrassment of being unable to afford and support. It must have the function of avoiding defects, because domestic bottom glass sometimes has defective products. The special-shaped cutting graphics library should be more flexible, and graphics made by computer-aided design should also participate in typesetting.

　　3. Cutting accuracy

　　 The general requirement of the building industry is less than 0.5 mm; the requirement for car rearview mirrors is less than 0. Olm.

　　 At present, the cutting accuracy provided by various machinery manufacturers is generally below 0. 2mm, but this cannot be seen only from the introduction of the product manual. A complete set of cutting accuracy test procedures should be set up during acceptance. The actual cutting precision product should be used as the standard. Through the test, you can fully grasp the flatness of the cutting platform and the synchronization control level of the control system.

　　 Fourth, easy to maintain

　　 Don’t equip too many mechanical sensors, try to reduce unnecessary switches and indicator lights, because once a mechanical device appears Failure will affect the use of the cutting machine, with fewer parts, low probability of failure, and less wiring, making it easy to find faults and replace parts. To debug the signal state on the screen. Maintenance cost is an important factor that should be considered when buying a machine.

　　5. Saved energy consumption

　　 When the cutting size meets the requirements, choosing an energy-saving gantry CNC cutting machine has many advantages. 1. Protect the environment and save energy; 2. Save daily expenses

Currently there is a global trend growing. People are more conscious about punching machine manufacturer and are seeking alternatives to traditional solutions.

And finally, if you want to find additional resources for INFO CENTER, simply go to Ventech Automatic Machine for more.

While the productivity and efficiency benefits of automation are unequivocal for manufacturing INFO CENTER, the need for skilled humans to operate, utilize and advance technologies is equally unmistakable.

The key to INFO CENTER is understanding where there is a problem or need in certain markets and knowing how to solve it.

Armed with professional team and advanced equipment, YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is specialized in offering high quality in various designs. Visit us at Ventech Automatic Machine to find your desired .