loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

Use fiber laser cutting machine-safety is very important!

Now, fiber laser cutting machines are very popular in domestic and foreign markets. Therefore, safety is very important when using this machine. This article introduces the operating steps of the fiber laser cutting machine.

1. The operator needs to be familiar with the performance of the equipment. More importantly, through safety training, technical training and management training.

2. Strictly implement the provisions in the 'Instruction Manual' of the fiber laser cutting machine provided by the original factory.

3. The equipment is operated by a dedicated person. The factory is responsible for training and has obtained the company's equipment operation qualification. Non-professionals are not allowed to operate the fiber laser cutting machine without authorization.

4. Operators need to wear good protective equipment to prevent scalds, burns, abrasions, crushing and avoid light source radiation.

5. Before starting the machine, please make sure that the water, electricity, and gas are in a normal state. After use, release the pressure and turn off the main power.

6. In order to maintain the health of the control room, dust will greatly reduce the power. The dust-free state will effectively extend the life of the equipment, so the equipment should be kept clean and hygienic.

7. It is necessary to ensure that the ambient temperature of the control room is between 5°C and 30°C, so care must be taken to prevent the freezer from freezing.

8. Be sure to check the lubrication condition of the equipment. If an abnormality is found, it needs to be shut down immediately for maintenance and overhaul. And the control system or laser failure should be contacted by professionals. Therefore, if you turn on the laser without authorization, you are at your own risk.

9. The operator cannot leave the production site in the starting state, and prevent the 'rocker' from touching the cutting head.

10. The gas pipeline should be emptied and purged frequently, especially when the temperature difference is large, and to prevent the condensate from contaminating the lens.

11. Frequently check the sintering condition of the purlin. Therefore, if the sintering is severe, it should be replaced immediately.

12. Long-term shutdown should be maintained and stored first, and then start the test machine.

The above are the operating steps of the fiber laser cutting machine. If you need to buy a fiber laser cutting machine, please call us for consultation. For more information, please feel free to contact us.

powder coating system for sale INFO CENTER processes have been widely used to produce punching machine manufacturer such as powder coating machine price, assembly machine manufacturers, and powder coating machine for sale etc.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. will be known for our leadership edge, through our passion for high standards, our respect for diversity and our commitment to create exceptional opportunities for professional growth so that associates can fulfill their highest potential.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. knew the only way to remain competitive was to ensure quality of service and customer satisfaction above all.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect