loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

Troubleshooting method of CNC aluminum profile double-head cutting machine

First of all, we need to know that the CNC double-head cutting machine is a special type of double-head cutting equipment based on a 45-degree cutting angle. Among ordinary double-head saws, the CNC double-head saw is a relatively high-end cutting equipment. So, when the double-head cutting machine equipment fails, how to check and detect it?

When there is a problem with the accuracy of the CNC aluminum double-head cutting machine or the length of the cut product is out of capacity, we need to check the matching saw blade to see if the saw blade has become smaller Or become bigger. If this problem is confirmed, we can directly adjust the compensation through the screen of the cutting equipment and the compensation of the cutting machine, so as to control the length and size of the cut material.

How to check the angle of the cutting equipment is not allowed to cut? First of all, we need to pass the normal lieutenant, because in the 45-degree and 90-degree switching process, if the switch is not particularly good, or only fine-tuning, this problem can be solved.

I also encountered a problem. During the cutting process of the CNC aluminum double-head cutting machine, customers complained about burrs on the cutting surface and poor cutting. This phenomenon also gives customers a headache. Some customers say that it is clear that the saw blade has just been replaced. Why is there a problem with burrs, if it is not cut for two days or a few days without rest.

In fact, this is because the cut material of doors and windows is the exterior part, and the rough edges will be very serious. Therefore, it is very important to install a micro-lubrication system or cooling system during the cutting process. In addition, the double-head cutting machine is also cut by a circular saw blade. Only the effect of lubrication and cooling comes out, which can not only increase the service life of the saw blade, but also the cutting surface of the material is smoother and natural without burrs.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is one of the world’s leading and most-trusted suppliers to the relevant markets.

For more information please see our site at Ventech Automatic Machine. Don't be hesitate to contact us!

We take advantage of high technology to produce products that support safer and better quality and that enhance the using experience of INFO CENTER.

Even INFO CENTER are being made fine with advanced equipment.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect