Track installation requirements for small gantry CNC cutting machine

In order to ensure the quality and accuracy of cutting, such as a small gantry CNC cutting machine, it needs to be processed in the early stage of installation. At present, it is common to install foundations. On this basis, the longitudinal running track of the gantry CNC cutting machine needs to be adjusted appropriately. In order to ensure the smooth operation of the whole machine, from the point of view of responsibility, although the above operations are completed by the manufacturer, as a user enterprise, it is appropriate to understand the relevant knowledge It will better ensure the stability of the equipment in later operation and the service life of the equipment.

1. Press a main rail and an auxiliary rail at one end with a pressure plate. This is to adjust the longitudinal and horizontal level of the rail, the flatness of the main rail and the auxiliary rail, and the distance between the main rail and the auxiliary rail. Base. The straightness of the guide rail is based on the standard distance between the steel wire and the side of the guide rail.

2. Adjust the distance between the two ends of each main guide rail and the standard steel wire. As the standard distance, the measuring tool is adjusting the pin and the feel meter.

3. Use a bubble level meter to adjust the horizontal and vertical level of the guide rail, gradually calibrate one end of the guide rail to the other end, and then measure the joints of the two guide rails to ensure level.

4. After the main rail and the auxiliary rail are qualified, the connecting bolts between the rails should be tightened carefully, and the rail should be pressed tightly with the pressure plate. At the same time, all parts of the rail should be carefully checked to ensure that it does not move or deform, and the horizontal plane and sides of the rail joint should be stable.

5. Tighten the 0.5/1000mm standard steel wire at both ends of the guide rail, and adjust the adjustment screws on the two base plates of the guide rail to make the distance between the two ends of the guide rail and the standard steel wire reach a certain value. This distance is used as Standard distance.

6. Use a steel tape with a tensile force of 20n and a tensile accuracy of 0.5/1000mm to measure the distance between the two ends of the main rail and the auxiliary rail. This should be the span of the machine tool. Otherwise, the guide rail should adjust the steel wire and ensure the standard distance by adjusting the steel wire.

7. Use the 0.1/1000mm guide rail and the auxiliary guide rail to measure the flatness of the main guide rail and the auxiliary guide rail, and use the guide rail lifting bolt to adjust the main guide rail. The flatness of the guide rail and the auxiliary guide rail is such that the flatness of the main guide rail and the auxiliary guide rail is not more than 0.5mm.

Related recommendation:

How much is the gantry CNC cutting machine? Why is there a big difference in prices?

Choose light gantry CNC cutting machine or heavy gantry CNC cutting machine

Guidelines for installation and debugging of gantry CNC cutting machine

The importance of INFO CENTER has increased as powder coating machine price have become a must in our daily life.

The Global INFO CENTER Leader. YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. will build a unique portfolio of VENTECH and related brands, striving to surpass our competitors in quality, innovation and value, and elevating our image to become the INFO CENTER company most customer turn to worldwide.

Visit Ventech Automatic Machine for the best in punching machine manufacturer INFO CENTER supplies and get the most cost effective for your INFO CENTER solution. Design and customization are also welcomed.