The stability of the machine is not guaranteed by the fiber laser cutting machine

According to precision, they are domestic glass tube laser engraving machine and imported gold radio frequency tube laser engraving machine. The machine precision of the glass tube is poor, and the effect is poor. Most of them are large-format machines for rough machining and customization without high precision. Imported metal radio frequency tube laser engraving machine has high precision, stable operating power and output energy, and good results.

According to the budget, the glass tube laser engraving machine is now domestically priced at cabbage, which is one to two to two 30,000 yuan, which is relatively cheap; the imported metal radio frequency tube laser engraving machine is more expensive, with its line and service life

From the perspective of service life, the failure rate of glass tube laser engraving machine remains high, and the stability of the machine is not guaranteed, and maintenance is often required; the overall stability of the CO2 metal radio frequency tube engraving machine is very high, and the failure rate is very low Basically, it can be used for more than ten years, just fill the laser tube gas in the middle.

According to the current statistics, China is a country in the world that still uses glass tube laser engraving machines, and has a large number of users and machines. In fact, other countries are already using laser engraving machines for metal radio frequency tubes. Because the safety of the glass tube machine is low, the machine itself has not undergone much safety testing. The connection and operation of the various components cannot be guaranteed, and the glass laser tube bursts often. The metal radio frequency tube laser engraving machine has high safety and good stability, which is more suitable for enterprises and universities.

Actually, it mainly depends on your budget. After all, imported machines are more expensive, but in terms of performance and productivity, the cost performance is higher than that of domestic glass tube laser engraving machines. The reason we know so much is because we have bought these two kinds of machines. At the beginning, I bought a glass tube laser engraving machine because of budget problems. I just bought three tubes in a month, and I didn't use it very well. The maintenance was very frequent and the cost was high. Later, I bought a metal radio frequency tube laser engraving machine from Master Laser. It has been used for nine years, and it has basically not been damaged, and the accuracy is also high. It is recommended that you still buy an imported machine, if the budget is really low, there is no way. Using imported radio frequency tube laser engraving machine can target the high-end market, carry out market exploration, and relatively speaking, the profit will be higher. The low-end market in modern society is basically heated, and it is not very good from the perspective of sustainable development.