loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

The solution for CNC laser cutting machine not emitting light: Knowing these can avoid some troubles

   During the use of the CNC laser cutting machine, you may encounter the situation that the CNC laser cutting machine does not emit light. The editor will lead you to analyze the causes and solutions of such failures.

   If you encounter a situation where the CNC laser cutting machine does not emit light, when such a failure occurs, you must first What is done is to check the machine, which can be carried out in the following 5 steps:

  1. Check whether the water circulation is normal, let the water circulate normally, if the water protection is damaged, you can short-circuit the water protection to use;

  2. Point pre-adjustment to see if the ampere meter is swinging. If it does not swing, use a multimeter to test whether the laser power supply has 220V power supply. If it does, it will not emit light. The power supply may be faulty and need to be replaced;

  3. The GND ground wire and P water protection short section on the power supply can also be used to test whether the water protection is broken. Short-circuit +5 v and AIN to check the maximum output power. If it emits light, the potentiometer is broken and needs to be replaced;< /p>

  4. If the running program does not emit light, connect the card to test whether there is a DC 3V or more between the 15 (H) or 16 (L) angle and the 14 angle. If there is, the card is normal. No There may be a problem with the card signal;

   5. There is a noise inside the laser power supply, usually because the power connector is poorly connected, re-welding or connecting, and then blow away the dust in the power supply.

   When you encounter a situation where the CNC laser cutting machine does not emit light, you must first check the machine itself. Follow the five-step strategy. Check the card and laser power supply step by step.

It has become necessary for YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. to continually cultivate, develop and update their skills to work successfully alongside high-tech.

have become more diverse in appearance and function thanks to the advanced technology. Choose a that you can trust to deliver an excellent user experience reliable performance at Ventech Automatic Machine.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. integrates research streams on team diversity and knowledge boundaries, and present a framework that considers the kinds of specific knowledge boundaries that must be spanned to achieve high-level, cross-boundary teaming.

We utilize our expertise to develop services that add value at each phase of theINFO CENTER development cycle. We evaluate and implement new strategies in response to changing customer profiles and market conditions.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect