The main installation structure of the CNC cutting machine and the description of each component of the corresponding product

1. Installation of large frame of YC series CNC cutting machine

The large frame includes beam, main beam end, secondary side beam and longitudinal gear box. The large frame is an integral part of an enterprise and can only be hoisted as a whole. In order to ensure safe lifting and reliable lifting, the one-way lifting beam lifting tool is intact before lifting, and the large lifting frame should avoid bending and torsion deformation.

The roller for side guide is fixed on one side and movable on the other side and can be adjusted. In order to make the large frame structure of the CNC cutting machine easy to develop and fall on the guide rail, the disc spring must be loosened first, so that the distance between the fixed roller and the movable roller can be selected as large as possible.

Open the outer longitudinal gearbox housing, the spring-loaded screws engage and make the gearbox, the gearbox to the swing angle, and then jam the solid wood or the like so that it cannot rotate, so that the installation can be effectively avoided The gear and rack rail collide.

When the large frame is hoisted by the lifting transport tool, the surface of the roller is also scrubbed with a cleaning agent. After scrubbing us, it slowly develops and drops and places it on a longitudinal horizontal guide rail to do this During the process, the four corners of the big frame should be clearly managed and observed by a dedicated person, organized and directed by a dedicated person in the middle of the society. When approaching the guide rail, it should be slightly moved. Note that the enterprise should drop the side with the side guide roller first. Make a bump guide surface.

After the large frame is installed, we need to look at the social situation of the front and rear development of the main end beam and the contact between the guide wheel and the guide rail, and compress the disc spring so that the main end beam passes the guide wheel and the guide rail laterally. Have good contact to ensure that the design frame has a good direction.

2. YC series is used to install the frame and cutting torch of CNC automatic cutting machine

There is a driver frame in the car frame with a transverse drive gear box, in order to make The frame can move around the output shaft of the gearbox, engage with the frame beam of the rack CNC cutting machine, and then move in the same direction, such as through a mirror strip, to another frame.

For installation and other effects on the frame, the handle for clamping the steel belt can be placed in a position to loosen it back, and the steel belt penetrates into the opening of the splint. Be careful when installing, so as not to damage the strip. The single cutting torch is the basic functional part of the cutting machine. Each frame has its own single cutting torch. After the frame is installed, the single cutting torch must be installed. After the single cutting torch is installed, the connection of different gases can be realized. Through pipelines and cables, etc.

3. Description of the structure of each component of the YC series CNC cutting machine

The gear box of the longitudinal data drive system driven by AC and servo control motors is installed on the main end '497The gear deceleration is transmitted to the network output shaft. The pinion on the output shaft meshes with the rack on the guide rail. When the pinion rotates, it drives the entire Chinese CNC cutting machine frame forward or backward. There is no gap between the pinion and the rack, because it uses a large number of frames to move the spring loaded, so that the position accuracy can be guaranteed.

The gearbox of the horizontal development drive system is very similar to the gearbox of the longitudinal data drive company. The difference is that it is installed in the torch active frame. The main frame moves laterally along the beam for analysis.

The torch of the company's CNC cutting machine moves forward through the lifting screw of the motor device, and is driven by the movement of the two circular linear guides linearly controlled by the lifting rod up and down. The lifting device has a limit switch up and down. The motor can have a variety of options, either a DC motor, an ordinary trapezoidal screw, an AC servo motor and a ball screw. The distance between the cutting torch and the steel plate is controlled by its capacitance or arc voltage.

In order to perform conventional cutting of carbon steel, the cutting torch assembly will be equipped with a flame cutting torch.

The cutting torch of CNC plasma cutting machine can be equipped with one or more plasma cutting torches according to different user management requirements. Both dry cutting methods and underwater cutting methods can be selected. That is, the underwater CNC plasma cutting machine can be used for cutting metal materials in various researches of enterprises.

Some companies need to cut the straight seam on the machine, only the machine can be equipped with a multi-flame torch straight seam.

Install a problem bracket on the single cutting torch chuck, and then we install three cutting torches on this bracket at the same time, namely: straight three cutting torches, this kind of cutting torch can be cut and various economic Straight bevel, such as V, K, X, Y type, but this kind of cutting torch can only do straight cutting, you can not change the direction of your own cutting technology.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. guarantees to providing quality products and services.

Are you looking for more information regarding INFO CENTER punching machine manufacturer? Visit Ventech Automatic Machine and contact us as soon as possible!

But loyalty programs aren't just a boon for customers – VENTECH gets access to tons of valuable data for opt-in marketing campaigns.