E-mail:Machine@chinaventech.com Expert for pre insulated duct CNC cutting machine.
Protection measures when operating the laser cutting machine. When using a laser cutting machine in industrial operations, some necessary protective measures need to be taken to avoid unnecessary injuries. After all, the body is the capital of the revolution!
Ten safety points for operating a laser cutting machine:
1. Operators must be trained, familiar with the structure and performance of the equipment, and master the knowledge of the operating system.
2. Do not process the materials before identifying the materials that can be irradiated or heated by laser, so as to avoid the potential hazards of smoke and vapor.
3. When starting the equipment, the operator shall not leave the platform or take care of it without authorization. If necessary, stop the machine or cut off the power switch.
4. Meet the safety performance standards of general cutting machines. Start the laser strictly in accordance with the laser start procedure.
5. Put the fire extinguisher in an easily accessible place, turn off the laser or blinds when it is not working, and do not put paper, cloth or other flammable materials near the unprotected laser beam.
6. Do not process the materials before clarifying the materials that can be irradiated or heated by laser, so as to avoid the potential hazards of smoke and vapor.
7. When an abnormality is found in the process, the machine should be shut down immediately, and the fault should be eliminated or the supervisor should be reported in time.
8. Wear occupational protective equipment as needed, and must wear compatible laser goggles near the laser beam.
9. When using gas cylinders, avoid crushing the welding wire to avoid leakage. The use and transportation of gas cylinders must comply with gas cylinder regulations. Do not explode gas cylinders in the sun or near heat sources. When opening the bottle valve, the operator should stand next to the bottle mouth.
10. Please observe the high-voltage safety regulations during maintenance. According to standards and procedures, the laser cutting machine is maintained every 40 hours of operation or once a week, and every 1,000 hours of operation or every six months. After turning on the power of the machine, manually turn it on in the X and Y directions at a low speed, and check for abnormalities.
YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is famous for creating innovative products like the INFO CENTER and supporting their market leadership with savvy marketing campaigns to build an elite brand.
The guiding vision of YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is 'Bringing the best to everyone we touch'. By 'The best', we mean the best products, the best people and the best ideas.
We create a group of experts to promote the quality standard and innovative technology of INFO CENTER.
Quick Links
Products
Contact Us