Specification for the use of fiber laser cutting machine1

The fiber laser cutting machine is a laser cutting machine that uses a fiber laser generator as a light source. Fiber laser is a new type of fiber laser that is on the international shelf development trend. It outputs a high-efficiency energy-relative density laser beam, which is concentrated on the surface of the product workpiece, so that the area on the product workpiece that is directly illuminated by the extremely fine concentrated point of light will melt and melt in an instant. Vaporization, according to the numerical control equipment system software to move the direct part of the light spot to complete automatic cutting, faster and more accurate.

1. During the operation of the machine, the operator must investigate the operation of the machine at any time to prevent the operator from leaving.

2. Follow the machine's power-on sequence: turn on the water pump first, then turn on the air pump power switch, then the workbench panel switch, then turn on the laser switch. When shutting down, turn off the laser switch first, then turn off the power switch, and then turn off the water pump .

3. When processing the workpiece, the smoke exhaust and blowing equipment must be turned on to avoid the smoke and dust from contaminating the gathering lens and the reflecting lens, otherwise it will affect the lens gathering and reflection, thereby indirectly affecting the processing strength and processing accuracy.

4. Cleaning the reflective lens and concentrating lens: pinch the reflective lens with two fingers, dip the camera lens cleaning paper in the cleaning liquid with the other hand, and gently drag it across the surface of the lens to avoid squeezing the lens surface with your fingers to avoid scratches; or use Dip a cotton swab into the camera lens cleaning fluid and quietly wipe the focusing lens until it is clean.

5. Formal processing. Regarding materials that have never been seen before, follow the power rule from low to high.

6. Clean water pipes or basins should be used to change the water when the laser is switched on. Do not use oily basins to prevent the inner wall of the laser tube from being oily and dirty, which should seriously affect the life of the laser tube.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. also discusses implications for both research and the practice of operations in building systems to help people succeed in both the short and long run.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. has a wide variation of including punching machine manufacturer, assembly machine manufacturers and powder coating machine price, etc.

We take advantage of high technology to produce products that support safer and better quality and that enhance the using experience of INFO CENTER.

The powder coating system for sale INFO CENTER is an all-servo system capable of storing hundreds of powder coating machine for sale process parameters to provide custom punching machine manufacturer profiles for each assembly machine manufacturers type and powder coating machine price configuration.

The same determination is critical for business owners. The journey in INFO CENTER business is both a challenging and rewarding experience.