Solutions to common problems of automatic rolling laser cutting machine

Solve the common problems of automatic fiber laser cutting machine:

1. Cutting and perforating technology

In various thermal cutting technology, only a few cases can be Starting from the edge of the board, in general, a small hole must be worn on the board. In the past, the punching compound machine first used the laser punching compound machine to punch holes, and then the laser began to cut through the small holes.

2. Deformation analysis of small holes (small diameter and plate thickness) in cutting process

In the process of small holes, we do not use the method of blasting perforation, but pulse perforation. As a result, the laser energy is too concentrated in a very small area, causing burning in the non-processed area, resulting in hole deformation, and affecting processing quality. At this time, the pulse perforation method should be changed to the blast perforation mode in the process to solve it. For low-power laser cutting machines, pulse perforation should be used to obtain a better surface finish.

3. The burr solution in the work piece when laser cutting mild steel

According to the working principle and design principle of the automatic fiber laser cutting machine, the following reasons are analyzed and the burr is found The main reason is the processed parts: the upper and lower positions of the laser focus are incorrect, and the focus position needs to be tested and adjusted according to the offset of the focus. The output power of the laser is not enough, so it is necessary to check whether the laser generator is working properly. If it is normal, observe whether the output value of the laser control button is correct and adjust it. The cutting speed is too slow, so the line speed needs to be increased during the operation control process.

The importance of INFO CENTER has increased as powder coating machine for sale have become a must in our daily life.

The best way to confront your powder coating system for sale problem is to search for a high quality offered by YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. at Ventech Automatic Machine. Take a look!

Although there are various available in the market (such as assembly machine manufacturers, punching machine manufacturer, and powder coating machine price), recent study results have made this powder coating machine for sale INFO CENTER a preferred INFO CENTER choice of the people.

In a nutshell, is actually an ultimate solution for powder coating system for sale and underestimating its value cost you higher than anything else. So grab it before you miss the boat.