Operation details of fiber laser cutting machine

A few years ago, YAG and CO2 laser cutting machines occupied a large market. In recent years, fiber laser cutting machines have replaced YAG and CO2 laser cutting machines and other traditional cutting solutions, such as EDM, plasma cutting, water jet cutting and wire cutting. When working with a laser cutting machine, it is very dangerous if there is a failure. Next, I will summarize some operation details of the fiber laser cutting machine for everyone, and I hope it will be helpful to everyone!

When operating a fiber laser cutting machine, you need to pay attention to the following points:

1. Observe the general safety rules of the cutting machine. The laser starts strictly in accordance with the laser start procedure, dimming and testing.

2. Operators need to be trained to be familiar with cutting software, equipment structure, performance and main operating system knowledge.

3. Wear protective clothing as required, and wear protective glasses that conform to the laser beam.

4. Unless it is clear that the laser can be used to irradiate or cut the material, do not handle the material to avoid the potential hazards of smoke and steam.

5. When the fiber laser cutting machine is started, the operator shall not leave the post or be responsible for it. If you need to leave, the operator should stop or cut off the power switch.

6. When an abnormal situation is found in the process, it should be shut down immediately, and the failure should be corrected or reported to the supervisor in time.

7. Place the fire extinguisher in an easily accessible location, turn off the laser or shutter when not handling it, and do not place paper, cloth or other flammable materials near the unprotected laser beam.

The importance of INFO CENTER has increased as powder coating machine for sale have become a must in our daily life.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. will continue to bring our industry nuances of style and approaches to INFO CENTER which are consistent with our evolving aspirations.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. has developed its range of products around its own market research, which discovers customers' precise needs.

punching machine manufacturer INFO CENTER offer a wide range of powder coating system for sale and gave the user the choice of powder coating machine price, assembly machine manufacturers and powder coating machine for sale.

The punching machine manufacturer INFO CENTER is also available as a powder coating system for sale.