Method for improving surface cutting quality of fiber laser cutting machine

Fiber laser cutting machine is a laser cutting machine that uses a fiber laser generator as a light source. It is an energy-saving and environmentally friendly product. It can be used for flat cutting or bevel cutting. The edges are neat and smooth. It is suitable for high-precision cutting of metal plates. Processing. However, the cutting surface is occasionally unsatisfactory when the equipment is cutting. This situation can be improved. Let me share with you the methods to improve the cutting surface quality of the laser cutting machine.

　　 1. Check the wear of the conductive block of the equipment. The laser cutting machine needs to change the cutting position of the conductive block or replace the conductive block after 50 to 80 hours of processing. If it is dirty, it needs to be cleaned with detergent. It should be noted that when changing the position of the conductive block or replacing the conductive block, the verticality of the electrode wire needs to be re-calibrated to ensure the accuracy and surface quality of the processed workpiece.

　　2. Check the rotation of the guide wheel of the fiber laser cutting machine. If the rotation is not good, replace it. Also carefully check the damage and degree of dirt on the upper and lower nozzles. Clean it in time when it is dirty, and immediately if it is damaged. For replacement, the condition of the wire in the wire storage tube should be checked frequently. Excessive wire loss will affect the processing accuracy and surface quality, so it needs to be replaced in time. In addition, the defective condition of the conductive block, the guide wheel and the upper and lower nozzles will also cause the vibration of the wire electrode. At this time, even if the machined surface can carry out a good discharge, the machined surface will easily produce wave crests or streaks due to the vibration of the wire electrode. Cause the surface roughness of the workpiece to deteriorate.

　　 The above is an introduction to improving the quality of the cutting surface of the fiber laser cutting machine. Our company is a professional manufacturer with many years of experience, rich experience, guaranteed product quality, and perfect after-sales service. If you need it, you can call me The company conducts consultation and ordering.

Nowadays, it is very common for us to utilise in punching machine manufacturer. And the quality of is decisive to production efficiency.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. also values the time, skills, and expert opinions of our staff. We are committed to providing fair and living wages, reasonable, structured work schedules, and clear duties and spheres of rights and responsibilities for each team member.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD., which prides itself on INFO CENTER for applying in different ways.