Matters needing attention before turning on the thin plate laser cutting machine

The use of thin-plate laser cutting machines not only requires regular maintenance, but also checks every time the equipment is used. The purpose is to determine whether the working state of the equipment is stable and whether there will be malfunctions, so the inspection work before starting up is still very necessary! So what should be paid attention to before starting the laser cutting machine? Basically these are the following points!

1. Before each boot. Carefully check the pressure status of the laser working gas and cutting auxiliary gas of the thin plate laser cutting machine. If the gas pressure is not enough, repair it in time;

2. Check whether the cooling water pressure of the thin plate laser cutting machine is between 3.5 and 5 Bar ;

3. Check whether the height of the oil level in the laser vacuum pump reaches the marking position;

4. Check whether the laser oil, water, and gas paths are leaking, and use it for more than half a year. Check whether there is corrosion in the cooling water pipeline of the laser head of the laser; check and clean the inside of the laser cavity and all the lenses

5. After the internal lenses of the laser of the thin plate laser cutting machine are cleaned, the laser light output should be readjusted Form, refer to the above content to do normal maintenance and at the same time inspect and maintain the machine tool and air cooler. If any part of the machine is found to be damaged, it must be replaced in time to ensure the normal operation of the machine.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. supports their market leadership with savvy marketing skills to create an prime brand.

VENTECH is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.

Unlike the powder coating machine price, the is more flexibly used in accasions where powder coating machine for sale .