Laser cutting machine manufacturers: precautions for online shopping and how to maintain

　　　　The technology of fiber laser cutting machine is quite mature, and it has a very large market share in the metal cutting industry. Nowadays, online shopping is very convenient, so many people choose this way of shopping. Then, our laser cutting machine manufacturer will introduce you the precautions for online shopping of laser cutting machine and how to maintain it.

　　1: Before starting up every day, carefully check the laser gas and cutting The pressure of the gas. If the air pressure is insufficient, it must be replaced in time.

　　2: Check whether the buttons of X-axis return to zero, Y-axis return to zero, Z-axis return to zero, laser preparation status, etc. are damaged (check the bulb).

　　3: Check whether the X-axis, Y-axis, Z-axis zero point, limit switches and bumper mounting screws are loose, and check whether the limit switches of each axis are sensitive.

　　4: Check whether the circulating water level in the water tank is sufficient. If it is insufficient, it must be refilled in time.

　　5: Check if there is any leakage in the external light path. Leakage must be dealt with in time; otherwise it will affect the life of the optical lens.

　　6: After cutting every day, check the damage of the focus lens.

　　7: Check whether the contraction cavity of the outer light path is burned or damaged.

　　8: After the daily work is over, clean up the site in time, clean up the chips, and keep the work site tidy. At the same time, the equipment needs to be cleaned to ensure that the equipment parts are clean and free of dirt and debris.

　　9: After the daily work is completed, open the air release valve of the gas storage tank to release air. After the waste water is discharged, close the drain valve.

　　10: After finishing the daily work, press the shutdown procedure to shut down, and then turn off the power of the whole machine.

　　1. You can ask the manufacturer of the laser cutting machine to provide the case around you and the telephone number of the purchaser at that time;< /p>

　　2, allow manufacturers to provide photos and warehousing photos during production and processing;

　　3, logistics delivery photos are also required;

　　4, let manufacturers Provide photos of internal company activities.

　　 The above is our fiber laser cutting machine manufacturer based on years of experience summed up the laser cutting machine online shopping precautions and how to maintain the introduction, I believe you can see the knowledge from the short introduction above, we I hope you can contact us if you want to know or need, and we will provide you with sincere service.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. have now make a decision to enlarge our company in other countries.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is committed to supplying the consumer and our customers with the finest, high-quality products and to leading the industry in INFO CENTER powder coating machine for sale.

Through our distribution and marketing competencies, YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the INFO CENTER company of choice.

Once we have a good idea of how INFO CENTER can satisfy customer’s needs, consider whether we should create a skill for their demands.

The key to INFO CENTER is understanding where there is a problem or need in certain markets and knowing how to solve it.