Laser cutting machine does this to avoid burr trouble

Hongte Laser Cutting Machine

The most common problem of laser cutting machine in the processing process is that it is easy to produce burrs. In layman's terms, sharp corners, burrs and other irregular metal parts appear at the transition of the workpiece surface. However, common does not mean that the generation of burrs is acceptable. It directly affects the dimensional accuracy, shape and position accuracy and surface roughness of the processed parts, reduces product quality, and brings subsequent inspection, assembly, use performance and aesthetics. There are many problems, so burrs should be avoided as much as possible.

Common causes and solutions for glitches

Reason one: The laser cutting machine produces a deviation in the up and down position of the laser beam focus, which causes the energy to not just converge on the workpiece, and the workpiece is not fully vaporized, which increases the amount of slag generated and is not easy to blow off. It is more prone to burrs.

Solution: Adjust the position of the focus of the laser beam, and adjust it to the best state according to the offset position it produces.

Reason two: The output power of the laser cutting machine is not enough to effectively vaporize the metal, resulting in excessive slag and burrs.

Solution: Check whether the laser cutting machine is working normally. If it is abnormal, it needs to be repaired and maintained in time; if it is normal, check whether the output value is correct.

Reason 3: The cutting line speed of the laser cutting machine is too slow, which destroys the surface quality of the cutting surface and produces burrs.

Solution: Adjust and increase the cutting line speed in time to make it reach the normal value.

Reason 4: The purity of the auxiliary gas of the laser cutting machine is not up to the required standard, which will also cause the workpiece to produce burrs.

Solution: Replace the auxiliary gas with higher purity.

Reason 5: The working time of the laser cutting machine is too long, which makes the equipment appear unstable, which will also lead to the generation of burrs.

Solution: Turn off the laser cutting machine and restart it after a period of time, so that it can be fully rested.

Nowadays, it is very common for us to utilise in punching machine manufacturer. And the quality of is decisive to production efficiency.

No, this isn't a wonder product and it won't be likely to change your life but it will give your powder coating machine price a kick and bring the extraordinary to the every day. give it a shot at Ventech Automatic Machine.

comes in a vast array of styles and powder coating system for sale depending on which powder coating machine for saleis used.

According to the market analysts, exports from YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. facilities in China will exceed the forecast.

assembly machine manufacturers needs not be tedious anymore with the application of . So getting the right INFO CENTER can drastically promote punching machine manufacturer.