Jinan gantry CNC cutting machine, these points must be paid attention to!

　　 Jinan gantry CNC cutting machine generally cuts on CNC plasma cutting machine 4 ~

10 mm. It is the same as the shrinkage of the electrode. Only when the distance is right, the cutting efficiency of the plasma arc can be fully utilized, otherwise the cutting efficiency and cutting quality will be reduced, or the cutting nozzle will burn out. On the CNC flame cutting machine, the height range is about 5

~ 12 mm.

　　 In order to ensure the cutting height, if the operator has limited experience, it is recommended that the user install an automatic height adjustment system to reduce the impact of misoperation. The actual processing speed is generally controlled at 300-400 mm/min. Compared with plasma cutting, the flame travel speed is slower. With the experience and technology of the operator, the verticality and quality of the cutting surface can be effectively guaranteed.

　　In actual processing, operators need to pay more attention to the control of flame temperature, which needs to be mastered by comprehensive cutting thickness. The CNC flame cutting machine is mainly embodied in two aspects of the cutting thickness. One is to control the temperature of the cutting flame, specifically to adjust the preheating time; the second is to replace the matched air pipe and gas circuit.

　　 Generally speaking, Jinan gantry CNC cutting machine cuts 120

For steel plates larger than mm, it is recommended to use tracheal gas path instead. Cutting large-thickness carbon steel has the ability to cut, and the cutting cost is low, but the cutting deformation is large, the cutting accuracy is low, the cutting speed is slow, the cutting preheating time and the piercing time are long, and it is difficult to meet the needs of fully automatic operation.

　　 Jinan gantry CNC cutting machine is mainly used for cutting carbon steel and large thickness plates. Plasma cutting will gradually replace it in cutting thin carbon steel plates. The portable cutting machine is developed from a semi-automatic car cutting machine. The numerical control system and the transmission device are installed on the automobile cutting machine. Its basic appearance is similar to a car-style semi-automatic cutting machine. The machine has low cost and light structure, which is especially suitable for small and medium-sized plate processing.

At a time when technology is essential for INFO CENTER, ensuring that it works in a symbiotic way with your human employees is key.

To learn more about INFO CENTER， give us a call at YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. or visit us online by going to Ventech Automatic Machine.

is something that has been around for a few decades now, enjoying it's heyday back in the powder coating system for sale.

You can get more information from Ventech Automatic Machine for on sale. welcome to visit us and send your inquiry!