Is the operation of the laser cutting machine complicated?

Users will have instructions when they buy something that is operable. Of course, this is no exception for large and expensive equipment such as laser cutting machines. The first thing users need to do is to read the instructions carefully. In addition to the technical engineers of the equipment manufacturer who will go to the customer site for laser cutting machine operation training, users also need to practice the operation and use time accumulation to digest the contents of the manual.

After long-term accumulation of experience, senior technical personnel in the laser cutting industry have summarized the following basic operation guidelines for novice users.

1. Fixed cutting materials. Fix the material to be cut on the working surface of the laser cutting machine;

2, adjust the equipment parameters according to the material and thickness of the metal plate;

3, select the appropriate lens and nozzle, Check before starting the machine to check its integrity and cleanliness;

4. Adjust the focus. Adjust the cutting head to the correct focus position;

5, check and adjust the nozzle center;

6, the calibration of the cutting head sensor;

7, select Suitable cutting gas, check whether it is intact;

8, try to cut the material. After cutting the material, check whether the cut end surface is smooth and check the cutting accuracy. If there are any errors, please adjust the equipment parameters accordingly until it proves to meet the requirements;

9. Make workpiece drawings, carry out corresponding layouts, and import the equipment cutting system;

9. p>

10. Adjust the position of the cutting head and start cutting;

11. During the operation, the staff must be on site and carefully observe the cutting situation. If an emergency occurs, you need to respond quickly and press the emergency stop button; if an emergency occurs, you need to respond quickly and press the emergency stop button.

12. Check the cutting quality and accuracy of the first sample;

Pay attention to checking the size of the auxiliary gas and gas pressure. If the gas is insufficient, it needs to be replaced in time.

The above-mentioned operation steps of the laser cutting machine have great reference value for new users, but the specific operation of the laser cutting machine should be adjusted according to the actual situation. I hope most users buy machines, operate machines, and use machines to create more and more value for their businesses.

VENTECH is the leading manufacturer of INFO CENTER and related products.

Finding the best products has been made easier, at YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.. Here you can see completed ranges of produced with advanced equipment and strict quality control. Go to Ventech Automatic Machine and send your enquiry if you have any question.

But loyalty programs aren't just a boon for customers – VENTECH gets access to tons of valuable data for opt-in marketing campaigns.

With the help of a powder coating system for sale INFO CENTER, assembly machine manufacturers becomes a reasonably easy job that you can take care of simply and swiftly.

comes in a vast array of styles and punching machine manufacturer depending on which powder coating machine for saleis used.