Is the burr of the metal laser cutting machine related to gas?

In the sheet metal processing process, in order for the metal laser cutting machine to exert the most stable efficiency and process various metal materials under the best working conditions, all its components must work together and must be perfectly matched. If we find that there are defects in the processed workpiece during the process of using the metal laser cutting machine, it means that there is a problem with some parts of the laser cutting machine, or there is an installation problem or data adjustment problem, let us use the most common Take the burr as an example. Many people don’t know much about the role of gas used in laser cutting machines. We understand the relationship between gas and burrs in metal laser cutting machines.

The relationship between burr and gas of metal laser cutting machine

How do glitches occur? In fact, burrs are excessive debris particles on the surface of metal materials. When the metal laser cutting machine processes the workpiece, the high energy generated by the laser beam radiated from the surface of the workpiece will quickly evaporate and evaporate the surface of the workpiece, so as to achieve the purpose of cutting. However, we must pay attention to a very key thing, that is, we generally require high-quality cutting production companies to use auxiliary gas.

The auxiliary gas is used to blow the slag onto the surface of the workpiece after the irradiated surface of the workpiece is vaporized. If the auxiliary gas is not used, after the slag cools, it will form burrs and stick to the cutting surface. The purity of the gas must be high. You can switch to a higher quality gas supplier. The purity of the gas is very important. It is best not to use gas cylinders, because after two fillings, the purity is not good and gas will be wasted.

Other reasons

Another reason is the quality of the equipment itself and the parameter setting factors. Therefore, after the customer purchases the laser cutting machine, the equipment should be debugged by professional operators. Adjusting the cutting parameters is the best, air pressure, focal length cutting speed, etc., need to be adjusted many times, and the parameters provided by the machine cannot be cut well. In addition, you need to understand the material to be processed. The same goes for carbon steel. With different carbon content, the parameters may vary greatly.

One increasingly popular managerial tactic to improve problem-solving performance of INFO CENTER is to increase the connectedness, or what academics call clustering, of the organization

All you women out there looking for amazing to dazzle the world try YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. latest collections at Ventech Automatic Machine. Try it!

To ensure desired results, it is very essential that you get the right kind of from a certified provider..