loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

Inspection points of gantry CNC cutting machine and how to prevent equipment accidents

   Gantry CNC cutting machine has high efficiency. The following are seven points that customers need to check before work: 1. Check whether the clamping block, steel belt and guide wheel are loose, and whether the steel belt is loose. 2. Check whether all transmission parts are loose, check the meshing of gears and racks, and adjust if necessary. 3. Check whether there is rubbish at the main air inlet, and whether all valves and pressure gauges are working properly. 4. Check whether all air pipe joints are loose and whether all pipes are damaged. Repair or replace if necessary. 5. Loosen the fastening device and push the pulley by hand to see if it can go in and out freely. If there is any abnormality, it should be checked, adjusted or replaced in time. 6. Check whether the power cabinet and the operating platform are loose, and use a vacuum cleaner or blower to clean the dust in the cabinet. Check if the connector is loose. 7. Check the performance of all buttons and selector switches. Highly automated automatic cutting equipment, so in daily operation and use, maintenance should pay attention to regular maintenance and regular maintenance.

   Gantry CNC cutting machine, as a large-scale processing equipment, involves electrical and other flammable and explosive materials, and requires strict operation and management. In the process of daily use, you need to pay special attention to some safe use specifications and precautions. In order to improve the awareness of enterprise users, we will arrange some safety details in the daily use of the CNC cutting machine as follows, hoping to help everyone.

   First of all, it is necessary to check whether the welding and cutting equipment is complete and easy to use to prevent accidents of the welding and cutting equipment. Mainly check whether the acetylene generator or electric welding machine is operating and used normally, whether the tempering preventer (including the rear-mounted tempering preventer) maintains a certain water level, whether the pressure gauge on the oxygen cylinder is firm, and whether the suction welding torch has suction , Whether there is air mixing in the acetylene generator, whether there are unsafe factors in the laying of the arc connection line, etc. Various flammable materials prevent fire accidents caused by welding sparks. In particular, it should be very good to check temporarily determined welding and cutting locations, and delineate welding and cutting work areas. When necessary, the safety rope should be pulled on the job site. The safety distance between combustible materials and welding and cutting operations is generally not less than 10 meters, but the specific conditions should be treated specifically, such as the magnitude of the wind, different wind directions, CNC cutting machines as operating parts, welding or cutting, etc. In short, welding and cutting sparks should be limited to places where flammable materials cannot accumulate.

   Gantry CNC cutting machine inspects the internal structure of the welding and cutting parts, and the flammable and explosive materials during the welding and cutting process can prevent explosion accidents. This is a very important safety preparation before welding and cutting operations. Especially for temporarily welded and cut parts, we cannot blindly weld and cut for simple work. Thermal welding and cutting can only be carried out when various unsafe factors are eliminated.

If you have a need for assembly machine manufacturers INFO CENTER, like , and , you need to be able to find a dependable provider who you can trust when necessary.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is an expert manufacturer that offers top-notch powder coating machine price INFO CENTER products in powder coating machine for sale. The company has a a lot of experience to offer quality ensured that cater to various customer demands. Simply visit YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. website to learn more.

While the productivity and efficiency benefits of automation are unequivocal for manufacturing INFO CENTER, the need for skilled humans to operate, utilize and advance technologies is equally unmistakable.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect