Improve the surface quality of fiber laser cutting machine wire cutting

1. The wear of the conductive block of the fiber laser cutting machine must be checked. The high-speed wire cutting machine generally needs to consider changing the cutting position of the conductive block or replacing the conductive block after processing for 50 to 80 hours. If it is dirty, it needs to use washing liquid For cleaning, the laser engraving machine studio stated that it must be noted that when changing the position of the conductive block or replacing the conductive block, the verticality of the electrode wire must be recalibrated to ensure the accuracy and surface quality of the processed workpiece.

2. Check the rotation of the guide wheel of the fiber laser cutting machine. If the rotation is not good, it should be replaced. The upper and lower nozzles must be carefully checked for damage and dirt. Clean the dirt with cleaning fluid. Replace it in time. The fiber laser cutting machine should also check the condition of the wire in the wire storage tube frequently. Excessive wire loss will affect the processing accuracy and surface quality. It needs to be replaced in time. In addition, the conductive block, guide wheel and upper and lower nozzles are defective. The condition can also cause the wire electrode to vibrate. At this time, even if the machined surface can conduct a good discharge, the machined surface is prone to wave crests or stripes due to the wire electrode vibration, which will eventually cause the surface roughness of the workpiece to deteriorate.

is a modern INFO CENTER widely used in punching machine manufacturer industry. It also enhances the quality assembly machine manufacturers value of the products.

Satisfying our customers with the appropriate level of quality is a primary goal and a fundamental element as INFO CENTER of our business mission.

Basically, you cannot have a powder coating machine for sale without having the right INFO CENTER. Since you are going to use it regularly, be sure to invest in one that has a high quality.

Increasing consumer awareness and rising concern about improving powder coating system for sale are driving the market of products.