If the gantry CNC cutting machine is not maintained, trouble will continue!

　　 improves the cutting efficiency and cutting quality requirements. It can be said that the use of the gantry cutting machine not only greatly improves the production efficiency of the cutting operation, but also saves a lot of manpower and material resources. While using the gantry cutting machine to create value, we must also pay attention to the daily maintenance of the gantry cutting machine. If the necessary maintenance is not carried out, what are the problems with the gantry CNC cutting machine?

　　1: The environmental humidity of the gantry CNC cutting machine is unbalanced: the industrial computer is composed of many integrated circuits The insulation of electronic components is very sensitive to environmental humidity. If the humidity is too high, it is easy to short circuit and burn the circuit board; if the humidity is too low, it is easy to generate static electricity, and some electronic components will be damaged. Therefore, we must strengthen the monitoring of environmental humidity in daily production. The worktable of the laser cutting machine has a great sense of vibration. In the process of production and operation, due to physical displacement actions such as dragging and vibration, the equipment will generate strong noise. The vibration caused by the equipment during operation will cause great damage to the disk, optical drive and floppy drive of the industrial computer. If there is a problem with the disk, CD-ROM, and floppy drive of the industrial computer, it will affect the system and cause the equipment to operate abnormally.

　　 Two: A large amount of metal dust produced by the gantry cutting machine will penetrate into all parts of the equipment. In addition, a large amount of metal dust will accumulate for a long time, which will also cause a great burden on the operation of the equipment. Therefore, we must ensure the cleanliness of the production workshop environment and clean up metal dust in time. The sliding rail of the gantry cutting machine should be wiped and maintained frequently to ensure the normal operation of the machine. If it is stuck, the voltage of the power supply motor will fluctuate greatly and the power will be easily cut off. The working time of the industrial computer of the laser cutting machine is too long. Due to production needs, the industrial control system of some users needs to work for a long time, which brings a huge load to the operating system of the industrial computer, and the internal temperature of the industrial computer is too high. In a long-term high-temperature environment, the various parts of the computer are in a high-temperature state for a long time. If they are not cooled in time, they are prone to aging and hard disk failure.

　　 The above is about the problems that the gantry CNC cutting machine will not clean up. I hope everyone must pay attention when using the laser cutting machine. Any mechanical equipment must be maintained in accordance with the regulations, so that it can run better and produce higher efficiency.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. supports their market leadership with savvy marketing skills to create an prime brand.

If you need INFO CENTER solution, you should always consult a professional provider. YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is one such a competent provider that is highly qualified to offer a wide range of products and services. Visit today!

Increasing consumer awareness and rising concern about improving powder coating system for sale are driving the market of products.