Expert for pre insulated duct CNC cutting machine.

How to maintain the laser cutting machine in summer?

by:VENTECH     2022-01-19

It is very obvious in summer that the temperature is high, and the high temperature will affect the use of the laser cutting machine to a certain extent. Therefore, in summer, we must take care of the maintenance measures for the cutting machine equipment to avoid some external factors from causing bad effects on the equipment. So the following editor will talk about how to maintain the equipment in summer.  1. The temperature rises in summer and the working pressure of the cooling system of the laser cutting machine increases. It is recommended to maintain the pressure of the cooler before the high temperature comes. The pressure of the equipment of different manufacturers is also different. It is recommended to consult the equipment manufacturer for specific parameters before maintenance.  2. Make sure that the laser tube is filled with circulating water before the machine works. The water quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank. Try to do this once a week.  3. There will be some mirrors and focusing mirrors on the laser cutting machine. The laser light is emitted from the laser head after being reflected and focused by these lenses. The lens is easy to be stained with dust or other contaminants, causing the loss of the laser or damage to the lens. So clean the lenses every day. At the same time of cleaning, pay attention to:   a, the lens should be gently wiped, and the surface coating should not be damaged;   b, the wiping process should be handled gently to prevent falling;   c, be sure to keep the concave surface down when installing the focusing lens.  4. Due to the high temperature in summer, the deterioration rate of the cooling water will also accelerate. It is recommended that users of laser cutting machines use distilled water or pure water, and regularly clean up the scale, so as not to cause the scale in the laser pipeline to affect the laser power. Different types of cutting machines have different methods of cleaning scale, and they need to be operated under the guidance of the manufacturer.   5. Since the dust of the laser cutting machine is mainly metal powder, it is recommended to regularly clean the dust in the electrical cabinet of the cutting machine and check the working condition of the cooling fan.   Therefore, when you perform maintenance work on the laser cutting machine in the summer, you must pay attention to whether your maintenance method is correct and whether it is suitable for the current demand of the cutting machine equipment. At the same time, after the cutting machine equipment is maintained, do not directly put it into work. First perform a trial run test on it to avoid damage to the equipment during the maintenance process.

It has become necessary for YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. to continually cultivate, develop and update their skills to work successfully alongside high-tech.
With continuous operational improvements, expanding capacity and a strong competitive position for serving strategic domestic markets, YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. are positioned for long-term growth that will benefit our customers and investors.
Equipping INFO CENTER with innovative technology and updated processes will simplify daily compliance duties so that they can focus on attracting, retaining, and developing the most engaged workforce possible.
With the market analysts, exports from YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. facilities in China will surpass the forecast.
We focus on operational procedure and manufacturing facilities of INFO CENTER.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
Thank you for your enquiry. We will get back to you ASAP