How to maintain the laser cutting machine in high temperature in summer

In summer, the temperature rises in various places, and many laser equipment will generate heat during use, which will cause some failures. Therefore, in order to prevent the laser cutting machine from malfunctioning in summer, everyone must pay attention to the maintenance and repair of the laser cutting machine, which can extend the service life of the machine.

With the arrival of the summer solstice, the weather is getting hotter and the temperature is rising. In the coming hot summer, Tianhong Laser reminds everyone to take good measures to prevent heatstroke whether it is going out to play or working outdoors. We people must not only be prepared for heatstroke prevention and cooling, but also the laser cutting machine must be well maintained to prevent the machine from 'heatstroke.'

Water cooling

In hot weather, the deterioration rate of the cooling water will also increase. It is recommended that users of the laser cutting machine use regular distilled or pure water and clean up the scale regularly, so as not to cause the scale in the laser and the pipeline to affect the laser power; pay attention to the temperature of the cooling water. The air temperature is very different. As the summer temperature gets higher and higher, the working pressure of the cooling system of the laser cutting machine increases sharply. It is recommended to check and maintain the internal pressure of the cooler before the high temperature comes, and adjust it to adapt to the high temperature in time.

Lubrication

Each rail should be cleaned frequently to remove dust and other debris to ensure the normal operation of the laser equipment. The frame should be wiped and lubricated frequently. Time needs to be adjusted. Compared with the spring and autumn season, shorten the time by 0.5-1 times and observe the oil quality. For machinery working in high-temperature areas, the viscosity grade of the oil should be appropriately increased, the temperature of the fatty oil is easy to change, and the oil should be properly added to ensure lubrication without debris. Carefully check the straightness of the cutting table, the trajectory of the laser cutting machine, and the verticality of the machine. If there is any abnormality, it should be repaired and debugged in time. The guide rail should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently, so that the machine is always in the best condition, so that the machine can move better during operation, cut more accurately, and the quality of the cut products will be higher.

Line

Check and replace the aging wires, plugs, hoses, and connectors; check whether the connector pins of electrical components are loose, and tighten them in time to avoid poor contact causing electrical appliances to burn out and signal transmission unstable.

To sum up, this is a small trick for summer high temperature maintenance laser cutting machine compiled by Jimet laser engineers. I hope it will be helpful to you. If you have different opinions on my sharing, I welcome your suggestions! If you have requirements for laser cutting machines, laser welding machines, laser pipe cutting machines and other laser equipment, you are welcome to inquire!

The point for YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is that managerial processes are as important as other inputs in production and can create significant competitive advantage.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is one of the best provider in China offering online INFO CENTER consultation and products to boost your powder coating machine price. Visit Ventech Automatic Machine and place your order now.

Deeper connections between VENTECH and INFO CENTERare made when you go beyond the white lights of a corporate space.