How to maintain and clean fiber laser cutting machine

Regarding any equipment that you want to use for a long time, protection is the first element. Long-term use will make the machine unstable and prone to failure. Therefore, protection and inspection should be carried out regularly to ensure the cutting accuracy of the cutting machine and extend the service life of the machine. So what accessories and items need to be checked and cleaned during use of the fiber laser cutting machine?

1. Cleaning and protection of the lens of fiber laser cutting machine:

The lens of fiber laser cutting machine is a consumable, especially the optical lens, including protective glasses, collimator lens, focusing lens, usually put it, check the device, pay more attention to prevent the lens from being damaged or contaminated. During the laser cutting process, a large amount of gas and metal impurities will be released from the surface of the workpiece, and these gas and splashes will damage the lens. Because contaminants fall on the surface of the lens, they will absorb the energy of the laser beam and cause a thermal lens effect. Viscous substances will increase the absorbance of the lens, and its use time will decrease when the lens is cleaned. To this end, we must pay attention to the following tasks:

Do not use your fingers to install the lens, you should wear finger cots or rubber gloves. When the device is disassembling the lens, do not touch the film. Instead, hold the edge of the lens to disassemble the device, handle it gently to prevent scratching the mirror surface. The lens should be placed in a dry and clean place for easy cleaning. Prevent secondary pollution of impurities.

How to clean the lens: When cleaning the lens, you must use absolute ethanol or 98% alcohol as the cleaning solution, soak a small amount of absorbent cotton with alcohol, wipe it with a directional light, and dry it with a dry cotton cloth to make the lens bright and transparent.

2. Cleaning and protection of optical fiber laser cutting machine tool guide rail and working table:

1. Guide rail cleaning: The guide frame should be cleaned regularly. Deal with the stains on the rails. After crushing, add a small amount of cleaning lubricant on the guide rail, move the guide rail, so that the lubricating fluid is evenly distributed on the guide rail. Be careful not to thicken the lubricating oil (butter). The lubricant adheres to the guide rail and is prone to bonding deformation, resulting in damage to the sliding block and the guide rail.

2. The method of organizing the operating platform: organizing the remaining data on the table. It takes half a year for the resume countertops, and a little clean anti-rust oil on the track is used for rust prevention, and other countertops are not used. Note: The workbench is easy to clean with water. The workbench is easy to rust, which accelerates the oxidation of the workpiece.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is specialized in sourcing assembly machine manufacturers INFO CENTER through its unparalleled worldwide network of supply. Go to Ventech Automatic Machine, you will surely find your ideal at the most favorable price.

To build customers value by delivering high-quality products, services and solutions in innovative and cost effective ways. YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. will realize this mission by setting the highest standards in service, reliability, safety and cost containment in our industry.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.'s core technology of INFO CENTER enables us to understand and utilize in a right way.