E-mail:Machine@chinaventech.com Expert for pre insulated duct CNC cutting machine.
When many manufacturers purchase laser cutting machines, they cost hundreds of thousands or even millions. For such precious equipment, if daily maintenance is not done to ensure its production efficiency, and to extend its service life as much as possible, the factory will suffer losses.
In the next step, the editor will share with you the daily maintenance content and precautions of the laser cutting machine:
1. Daily equipment inspection
1. Before starting up every day, carefully check whether the working gas pressure and the pressure reducing valve are working properly to avoid insufficient air pressure and affect the quality of the incision;
2. Check whether the two cooling water circulations are normal , To prevent the poor cooling of the optical path mirror from affecting the cutting quality or even damaging the lens;
3. Check the focusing lens and reflector, and clean them in time to ensure the cutting quality and the service life of the focusing lens. If the surface of the lens is discolored, rusty, and the film is peeled and cracked, these are all objects that need to be replaced, especially the large air pumps and air compressors used in many factories. This is easy to cause water accumulation in the focusing lens. Therefore, the lens in the optical system must be cleaned regularly. And quality.
2. Daily cleaning and maintenance
1. Clean up the dirt and dust on the machine body, cutting head, sensor and other parts in time;
2. Clean up in time Flammable materials in the machine tool, such as gloves, rags, etc., to prevent fire during cutting;
3. Clean the slag in the hopper residue car in time to ensure smooth cutting.
Three, pay attention to the size of power consumption
1. Use the power grid to match.
2. The working current of the laser tube should be reasonable, and it is not suitable to work at full power for a long time; when the laser equipment is working, the power should be adjusted to 50-60% of the total power, and then the working speed should be adjusted according to the material. Achieve the best working condition of the laser tube.
Four. Maintain a good working environment
If the environment is too dusty and the air pollution is serious, then the working environment of the laser cutting machine should not be too bad, which will cause damage to the machine , The failure rate continues to rise.
VENTECH saves time and increases productivity because it's one of the most complete sources of business and contact information.
YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. is a reliable company that offers wonderful . In addition, the company also provides related components to make it more efficient. To know more, go to Ventech Automatic Machine.
assembly machine manufacturers INFO CENTER are used largely for powder coating system for sale such as punching machine manufacturer.
Quick Links
Products
Contact Us