loading

E-mail:Machine@chinaventech.com              Expert for pre insulated duct CNC cutting machine.

How to distinguish the quality of laser cutting machine

Hongte Laser Cutting Machine

How to judge the quality of a laser cutting machine? The quality of a laser cutting machine is a question that customers are very concerned about when buying. How do we judge the quality of a laser cutting machine during the purchase process? With With the development of technology, there are more and more types of laser cutting equipment, and the laser cutting machine is one of them. How to distinguish the quality of the laser cutting machine? Mainly judge from the following seven aspects.

1. Roughness

The laser cut part will form a vertical texture, and the depth of the particle determines the roughness of the cut surface; the shallower the particle, the smoother the cut part. In most cases, the roughness must be reduced as much as possible, so the lighter the texture, the higher the cut quality.

2, verticality

If the thickness of the metal plate exceeds 10mm, the perpendicularity of the cutting edge is very important. When away from the focal point, the laser beam becomes divergent. Depending on the position of the focal point, the incision becomes wider toward the top or bottom. The more vertical the edge, the higher the cutting quality.

3. Cutting width

The width of the cut usually does not affect the quality of the cut. The cut width plays an important role only when a particularly precise contour is formed inside the part. This is because the width of the cut determines the contour, and the thickness of the sheet The increase of the cutting width also increases.

4, lines

When cutting the slab at high speed, the molten metal will not appear in the slit below the vertical laser beam, but will be ejected after the laser beam is deflected. As a result, a curve is formed at the cutting edge and the line is tight Following the moving laser beam, in order to solve this problem, the feed speed is reduced at the end of the cutting process, and it can be greatly eliminated

5, glitch

The formation of burrs determines a very important factor in the quality of laser cutting, because removing the burrs requires extra work, so the severity and quantity of the burrs can directly determine the quality of the cutting.

6. Material deposition

During the cutting process, the surface of the slit can form surface deposition, and the amount of deposited material can also see the quality of the laser cutting equipment.

7. Deformation

If the part heats up sharply due to cutting, deformation will occur, so the smaller the deformation, the better the cutting quality.

VENTECH allocates customer service resources to the platform where their customers are most vocal.

We are an experienced supplier of and have gained good reputaion among global customers. With a wide range of in offer, we can customize according to your requirement. Send us your enquiry at Ventech Automatic Machine.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. needs to ensure we're resolving customer issues as quickly as possible. By doing so, it leads to positive customer experiences and brand loyalty.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.

We believe in keeping the customers happy and providing them with INFO CENTER at a very competent price.

GET IN TOUCH WITH Us
recommended articles
knowledge INFO CENTER NEWS
no data

Contact Us

Tel : +86 757 29200196
Mobile : +86-189 27789653
E-mail : machine@chinaventech.com
Address : No. 3, Hongcha Road, Yinghong
Industrial Zone, Yingde, 513042, Qingyuan, Guangdong, ChinaYPE 2019

Better Touch Better Business

Contact Sales at  VENTECH.

Air Units

Call Us

+86  18927789653

Copyright © 2025 Yingde Ventech Intelligent Equipment Co., Ltd. | Sitemap
Customer service
detect