How to check the air tightness of fiber laser cutting machine

The fiber laser cutting machine is assembled with air-tightness active inspection. The frame and the pipe are equipped with symmetrically distributed invariable plates on both sides of the bottom of the frame. The pipe is arranged between the two invariable plates, and the invariant plate is far away from the first part of the pipe. The side is equipped with a blocking mechanism, the side of the non-changing plate facing the pipe is equipped with a clamping mechanism, the bottom end of the pipe is equipped with a feeding mechanism, the lower end of the feeding mechanism is equipped with a lifting mechanism, and the non-changing plate is mounted on the side wall of one end of the pipe. It is equipped with a promotion mechanism to realize the automatic feeding of pipes, and the feeding is stable, and the air tightness inspection of the pipes in the laser cutting process is carried out to ensure the product quality, the layout decision is simple and reasonable, the production difficulty is small, and the cost is low , Applicable to promote applications.

　　 Fiber laser cutting machine frame, rear conveying chuck, front rotating chuck, cantilever and cutting head, the front rotating chuck and cantilever are not fixed at the front end of the frame, and the rear conveying chuck can be installed The frame slides along the X axis, the cutting head is arranged on the cantilever and can slide along the Y axis and the Z axis, and the cutting head is placed between the front rotating chuck and the cantilever. The overall layout of the fiber laser cutting machine adopts an integrated installation decision, that is, the X-axis, Y-axis and Z-axis guide rail pairs are fixed on the rack, and the whole job can realize the overall hoisting, which greatly improves the compliance of the installation. And precision. Others can reduce the space between the cutting head and the fulcrum, which is more stable, more in line with the requirements of high-speed cutting, and can also reduce the overall space size.

　　 Fiber laser cutting machine tube supports assembly, the base is equipped with a help support mechanism along the length of the deflection, and a locking mechanism is set between the help support mechanism and the base to help support the mechanism bottom plate, and the bottom plate is vertically equipped with two parallel configurations The top of the two side plates is equipped with a horizontally configured upper constant plate, and a vertically arranged ball screw pair is arranged between the two side plates. The bottom pulley of the ball screw pair is connected with a hand wheel. The top of the screw pair is connected with the bottom of the upper unchanging plate. The front end of the pipe cutting machine is equipped with a movable support assembly, which adopts manual clamping, lifting and lowering methods, so that the cut pipe and the rotation center of the chuck are on the same straight line, which guarantees the overall cutting accuracy and the energy source is not affected. The premise of the workshop equipment is limited, the support results are good, the layout is simple, the control is convenient, and the applicability is strong.

are an important part of the society and they come in handy in any place where there are assembly machine manufacturers in need of powder coating machine for sale.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. intends to make enough profit to generate a fair return for our investors and to finance continued growth and development in INFO CENTER.

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD. are trained to think about problems and coming up with solutions, as well as presenting the whole idea in a logical and coherent manner.